$300-$499

Goko Hamono - Kogetsu - Mandai - Stainless - 240mm Gyuto - Western Mahogany Handle

DAA-025-09-FA240

€414,95

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Made In: Chiba City, Chiba - Japan
Profile: Gyuto
Edge Length: 241mm
Blade Height: 54mm
Edge Steel: Stainless
Grind: Convex
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Total Length: 372mm
Spine Length: 246mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 130mm
Weight: 231g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Goko Hamono - Kogetsu - Mandai - Stainless - 240mm Gyuto - Western Mahogany Handle

HADO - Sumi - White #2 - Kurouchi - 240mm Gyuto - Oak Handle

1000087

€365,95

Brand: HADO
Smith: Yoshikazu Tanaka
Sharpener: Tadataka Maruyama
Profile: Gyuto
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Mono Oak Wa
Total Length: 390mm
Edge Length: 233mm
Spine Length: 246mm
Blade Height: 52mm
Thickness at Spine: 3.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 144mm
Weight: 201g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

HADO - Sumi - White #2 - Kurouchi - 240mm Gyuto - Oak Handle

Hitohira - Kikuchiyo - Mosuke - Silver #3 - 240mm Yanagiba - Ho Wood Handle (Saya)

AAA-516-05-IA240

€341,95

Brand: Hitohira ひとひら
Made in: Sakai-Osaka/ Japan
Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Line: Kikuchiyo x Mosuke
Profile: Yanagiba
Edge Length: 233mm
Blade Height: 33mm
Edge Steel: Yasuki Silver #3 (Ginsan)
Steel Type: Stainless Steel
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 244mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 133mm
Total Length: 378mm
Weight: 133g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Kikuchiyo - Mosuke - Silver #3 - 240mm Yanagiba - Ho Wood Handle (Saya)

Hitohira - Tanaka x Kyuzo - Blue #1 Kurouchi - 240mm Gyuto - Yakusugi Cedar Handle

aaa-020b1k-69-fa240

€482,95

Brand: Hitohira ひとひら (一片)
Smith: Tanaka 田中
Sharpener: Kyuzo 久蔵
Profile: Gyuto
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Yakusugi Cedar Wa
Total Length: 390mm
Edge Length: 232mm
Spine Length: 245mm
Blade Height: 51mm
Thickness at Spine: 3.5mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1mm
Handle Length: 145mm
Weight: 202g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Tanaka x Kyuzo - Blue #1 Kurouchi - 240mm Gyuto - Yakusugi Cedar Handle

Hitohira - Tanaka x Manzo - Blue #1 - 270mm Takobiki - Extra Height - No Handle

AAA-115B1-JA270

€341,95

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka 田中
Sharpener: Manzo
Line: Tanaka x Manzo
Profile: Takobiki
Edge Length: 261mm
Blade Height: 33mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: N/A
Ferrule/Bolster Material: N/A
Total Length: 391mm (tang included)
Spine Length: 277mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 2.3mm
Handle Length: N/A
Weight: 163g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tanaka x Manzo - Blue #1 - 270mm Takobiki - Extra Height - No Handle

Miyazaki Kajiya - Hineri Damascus - Blue #1 - 240mm - Gyuto - Magnolia Handle

MZHDB1-024

€482,95

Brand: Miyazaki Kaijya
Line: Hineri Damascus
Made in: Goto Islands, Nagasaki - Japan
Smith: Haruo Miyazaki 宮崎春生
Sharpener: Haruo Miyazaki 宮崎春生
Profile: Gyuto/Chef
Edge Length: 245mm
Blade Height: 55.4mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, Warikomi
Cladding: Soft Iron Damascus
Finish: Forced Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 260mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: .9mm
Handle Length: 148mm
Total Length: 406mm
Weight: 245mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Miyazaki Kajiya - Hineri Damascus - Blue #1 - 240mm - Gyuto - Magnolia Handle

RYUSEN - BLAZEN RYU WA - SG2 Nashiji - 240mm Kiritsuke Gyuto - Walnut Handle

BZ-403

€453,95

Brand: Ryusen Hamono 株式会社龍泉刃物
Line: BLAZEN RYU Wa
Profile: Gyuto
Edge Steel: SG2
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Wenge Wa
Total Length: 395mm
Edge Length: 240mm
Spine Length: 260mm
Blade Height: 45mm
Thickness at Spine: 3.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 135mm
Weight: 152g

RYUSEN - BLAZEN RYU WA - SG2 Nashiji - 240mm Kiritsuke Gyuto - Walnut Handle

RYUSEN - BONTEN UNRYU - VG10 Damascus - 240mm Gyuto - Western Handle

BU-103

€390,95

60HRC Hardness

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Black Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 48mm
Thickness at Spine: 3.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 236g

RYUSEN - BONTEN UNRYU - VG10 Damascus - 240mm Gyuto - Western Handle

RYUSEN - BONTEN UNRYU WA - VG10 Damascus - Kengata Sujihiki - 240mm - Wenge Handle

BU-310

€385,95

Brand: Ryusen 株式会社龍泉刃物
Line: Botenunryu
Profile: Kengata Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Wenge Wa
Total Length: 380mm
Edge Length: 250mm
Spine Length: 254mm
Blade Height: 32mm
Thickness at Spine: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 126mm
Weight: 119g

RYUSEN - BONTEN UNRYU WA - VG10 Damascus - Kengata Sujihiki - 240mm - Wenge Handle

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Gyuto - Maple Hybrid Handle

TG-601

€482,95

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Gyuto - Maple Hybrid Handle

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Gyuto - Micarta Hybrid Handle

TG-501

€429,95

60HRC Hardness

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Micarta Hybrid Western
Total Length: 379mm
Edge Length: 231mm
Spine Length: 250mm
Blade Height: 46.5mm
Thickness at Spine: 2.2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 126mm
Weight: 217g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 240mm Gyuto - Micarta Hybrid Handle

RYUSEN - TANGANRYU - VG10 - Tsuchime Damascus - Sujihiki - 240mm - Black Micarta Hybrid Handle

TG-509

€390,95

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Black Micarta
Total Length: 380mm
Edge Length: 236mm
Spine Length: 250mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 193g

RYUSEN - TANGANRYU - VG10 - Tsuchime Damascus - Sujihiki - 240mm - Black Micarta Hybrid Handle

RYUSEN - TANGANRYU - VG10 - Tsuchime Damascus - Sujihiki - 240mm - Maple Hybrid Handle

TG-609

€482,95

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan RYU
Profile: Sujihiki
Edge Steel: VG10
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Western
Total Length: 377mm
Edge Length: 235mm
Spine Length: 250mm
Blade Height: 37mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 125mm
Weight: 167g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

RYUSEN - TANGANRYU - VG10 - Tsuchime Damascus - Sujihiki - 240mm - Maple Hybrid Handle

Sakai Kikumori - Kikuzuki Kasumi - White #2 - 240mm Kiritsuke Gyuto - Ho Wood Handle

€365,95

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Kasumi
Profile: Kiritsuke Gyuto
Edge Length: 221mm
Blade Height: 44mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 377mm
Spine Length: 243mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 133mm
Weight: 148g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Sakai Kikumori - Kikuzuki Kasumi - White #2 - 240mm Kiritsuke Gyuto - Ho Wood Handle

Sakai Kikumori - MK - Blue #2 - Kurouchi Tsuchime - 240mm Gyuto - Oak Handle

MK-024

€341,95

Brand: Sakai Kikumori 堺菊守
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 248mm
Blade Height: 56.4mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 400mm
Spine Length: 265mm
Thickness of Spine at Handle: 4.1mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1mm
Handle Length: 140mm
Weight: 257g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Sakai Kikumori - MK - Blue #2 - Kurouchi Tsuchime - 240mm Gyuto - Oak Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Bread Knife - Integral Bolster Maple Burl Handle

B10-1000

€438,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Bread Knife
Edge Length: 250mm
Blade Height: 42mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 380mm
Spine Length: 250mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 130mm
Weight: 213g
Saya/Guard: Purchased Separately

The STEELPORT Bread Knife is designed to perform equally well cutting bread with hard crusts and softer loafs. It can also be used as a serrated slicer for cutting through BBQ meats, and other hard crust foods.

The STEELPORT Bread Knife features a unique ‘Wavy’ serration (rather than a pointed serration) resulting in a finer, sharper edge which requires less of sawing motion and can slice, rather than saw, through food with ease and is less destructive to both the food and cutting board.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Bread Knife - Integral Bolster Maple Burl Handle

STEELPORT Knife Co. - 52100 Differentially Hardened - 10" Slicer - Integral Bolster Maple Burl Handle

S10-1000

€438,95

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Slicer
Edge Length: 255mm
Blade Height: 42mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 382mm
Spine Length: 252mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 130mm
Weight: 236g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.