210mm-225mm (8.25"-9")

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Gyuto
Edge Length: 216mm
Edge Steel: Ginsanko (S3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 377mm 
Spine Length: 230mm 
Blade Height: 47mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 144mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Gyuto
Edge Length: 210mm
Edge Steel: SG2
HRC: 62-64
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 230mm
Spine Length: 210mm
Handle Length: 115mm
Blade Height: 45mm
Thickness: 1.7mm
Weight: 170g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: T10
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 337mm
Edge Length: 212mm
Spine Length: 217mm
Blade Height: 45mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 117mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 180mm
Hardness: 59 HRC
Steel Type: Stainless
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 313mm
Spine Length: 190mm
Handle Length: 121mm
Blade Height: 45mm
Thickness: 2.5mm
Weight: 185g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Nakiri
Edge Length: 165mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 295mm
Spine Length: 172mm
Handle Length: 122mm
Blade Height: 46mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.4mm
Weight: 187g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.4mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen  株式会社 龍泉刃物
Line: Botenunryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric 
Handle: Black Pakka Western
Total Length: 335mm
Edge Length: 214mm
Spine Length: 215mm
Blade Height: 45mm
Thickness at Spine: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 194g

Brand: Hitohira ひとひら (一片) 
Line: Imojiya TH Damascus
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Soft Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Handle: Red Pakka Wa
Hand Orientation: Ambidextrious 
Total Length: 364mm
Edge Length: 206mm
Spine Length: 223mm
Blade Height: 46mm
Handle Length: 140mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 160g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Maple Hybrid Western
Total Length: 347mm
Edge Length: 204mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2.4mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 125mm
Weight: 178g

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen 株式会社 龍泉刃物
Profile: Bread
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: 
Handle: 
Total Length: 
Edge Length: 
Spine Length:
Blade Height:
Thickness at Spine: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length:
Weight: 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

60HRC Hardness

Brand: Ryusen 株式会社 龍泉刃物
Line: Tangan Ryu
Profile: Gyuto
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle: Black Micarta 
Total Length: 350mm
Edge Length: 208mm
Spine Length: 220mm
Blade Height: 43mm
Thickness at Spine: 2mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 125mm
Weight: 200g

Brand: Hitohira ひとひら (一片) 
Made in:  Sanjo-Niigata/ Japan
Line: TD SLD
Profile: Gyuto
Edge Length: 214mm
Blade Height: 48mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase, San-Mai
Cladding: Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut 
Ferrule/Bolster Material: Boxwood
Total Length: 366mm
Spine Length: 230mm
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1mm
Handle Length: 134mm
Weight: 166g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 335mm
Edge Length: 215mm
Spine Length: 127mm
Handle Length: 104mm
Blade Height: 46mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 184g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 217mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 373mm
Spine Length:  230mm
Blade Height: 47mm
Thickness: 1.7mm
Handle Length: 142mm
Weight: 154g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Ginsanko
Profile: Kiritsuke Gyuto
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Migaki
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wa
Total Length: 370mm
Edge Length:212mm
Spine Length: 225mm
Blade Height: 45mm
Spine Thickness at Handle: 2.6mm
Spine Thickness 1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 141g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.