$100-$199

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in  the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is resistant to both rot and mold. Because of these resilient Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

380mm x 520mm x 30mm

 Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in  the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is resistant to both rot and mold. Because of these resilient Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

300mm x 550mm x 30mm

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in  the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is super duper rot and mold resistant. Because of these resilient properties Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

475mm x 230mm x 30mm, ~1556g

Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements. The board may warp overtime, store flat.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Gyuto/Chef
Edge Length: 240mm
Blade Height: 50mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 242mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 120mm
Total Length: 365mm
Weight: 206g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 217mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 373mm
Spine Length:  230mm
Blade Height: 47mm
Thickness: 1.7mm
Handle Length: 142mm
Weight: 154g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Nakiri
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless Kurouchi Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 315mm
Edge Length: 162mm 
Spine Length:  180mm
Blade Height: 51mm
Spine Thickness: 1.7mm
Handle Length: 135mm
Weight: 157g 
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Santoku
Edge Length: 184mm
Edge Steel: Ginsanko (Silver 3)
Steel Type: Stainless
Cladding: Stainless Nashiji
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry wood handle & ebony ferrule
Total Length: 315mm
Spine Length: 182mm
Handle Length: 133mm
Blade Height: 47mm
Thickness of Spine at Handle: 1.9mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 125g
Saya: Sold Separately 

Please Note: These pictures and measurements are examples. Individual knives may differ
slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Bunka
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Soft Stainless Nashiji
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal
Total Length: 322mm
Edge Length: 175mm 
Spine Length:  187mm
Blade Height: 43mm
Spine Thickness: 1.8mm
Handle Length: 135mm
Weight: 117g 
Saya: Purchased Separately. 

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Gyuto
Edge Length: 216mm
Edge Steel: Ginsanko (S3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 377mm 
Spine Length: 230mm 
Blade Height: 47mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 144mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Ginsanko
Profile: Kiritsuke Gyuto
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Stainless Migaki
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wa
Total Length: 370mm
Edge Length:212mm
Spine Length: 225mm
Blade Height: 45mm
Spine Thickness at Handle: 2.6mm
Spine Thickness 1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 141g
Saya: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Futana
Profile: Bunka
Edge Steel: Super Blue
Steel Type: Stainless-Clad Carbon
Cladding: Soft Stainless
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Octagonal Cherry Octagonal with Ebony Ferrule 
Total Length: 322mm
Edge Length: 175mm 
Spine Length:  187mm
Blade Height: 43mm
Spine Thickness: 1.8mm
Handle Length: 135mm
Weight: 157g 
Saya: Purchase Separately.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Futana SB Migaki
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: Super Blue
Steel Type: Carbon
Cladding: Soft Stainless Clad
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 374mm
Spine Length: 228mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 144mm
Weight: 130g
Saya/Guard: N/A

Brand: Hitohira ひとひら (一片)
Line: White #2 Migaki Tsuchime
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: White #2
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Migaki Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 376mm
Spine Length: 230mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 145mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen, Fukui - Japan 
Line: GR
Profile: Santoku
Edge Length: 165mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Octagonal Rosewood Handle, Pakka Ferrule
Total Length: 304mm
Spine Length:178mm
Handle Length: 127mm
Blade Height: 45mm
Thickness of Spine at Handle: 2.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 122g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: HG
Profile: Petty
Edge Length: 155mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry wood
Total Length: 282mm
Spine Length: 162mm
Handle Length: 125mm
Blade Height: 29mm
Thickness of Spine at Handle: 1.7mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.7mm
Weight: 65g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.4mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki, Gifu - Japan
Profile: Santoku
Edge Length: 185mm
Blade Height: 45.4mm
Edge Steel: Undisclosed Stainless Steel
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Stainless Damascus
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Spine Length: 195mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .9mm
Handle Length: 135mm
Total Length: 330mm
Weight: 110g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: HG
Made in: Seki-Gifu, Japan
Profile: Nakiri
Edge Length: 158mm
Blade Height: 45.5mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase(clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 177mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 2mm
Handle Length: 135mm
Total Length: 305mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.