Hitohira - Togashi - White #1 Stainless Clad - Kasumi - 270mm Sujihiki - Ebony Handle

Hitohira - Togashi - White #1 Stainless Clad - Kasumi - 270mm Sujihiki - Ebony Handle

AAA-125W1KS-05-GA270

€502,95

Brand: Hitohira ひとひら (一片)
Made in: Sakai-Osaka/ Japan
Smith: Togashi Blacksmith 富樫打刃物製作所
Sharpener: Kenya Togashi
Line: White #1 Stainless Clad
Profile: Sujihiki
Edge Length: 258 mm
Blade Height: 38 mm
Edge Steel: Yasuki White (Shirogami) #1
Steel Type: Carbon Steel
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kasumi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 418 mm
Spine Length: 279 mm
Thickness of Spine at Handle: 2.8 mm
Thickness ½ way: 2.3 mm
Thickness ~1cm from Tip: 0.7 mm
Handle Length: 149 mm
Weight: 193 g
Saya/Guard: Purchase separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.