Sujihiki/Slicer

Brand: Goko Hamono 五香刃物製作所
Line: Kogetsu 光月
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A, Mono-steel
Bevel: Double
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 39mm 
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 125mm
Weight: 161g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: SPG Strix
Made in: Aomori, Japan
Smith: Nigara Homono
Profile: Sujihiki/Slicer
Edge Length: 227mm 
Blade Height: 40mm 
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (Clad); San Mai
Cladding: Soft Stainless
Finish: Tsuchime (Hammered); Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 241mm 
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 138mm
Total Length: 381mm 
Weight: 161g 
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Slicer
Edge Length: 255mm
Blade Height: 42mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 382mm
Spine Length: 252mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 130mm
Weight: 236g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.