Medium to high grit powder of assorted quality stones. Ideal for fine-tune polishing or to remove light rust. Can be applied with numerous applicators like a cotton ball, rag, cork, felt, balsa wood, etc. Water is needed to apply. May require further powderizing of any potential slightly larger bits. Use first before Ozuko powder and after Suita powder.
Naniwa - Whetstone - Base - #220
faeaa-010-220
Regular price
€19,95
Save €-19,95
"Base" series; Does NOT include base
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Naniwa - Whetstone - Goken Arata - #1000
LAEAA-110-1000
Regular price
€63,95
Save €-63,95
Grit: #1000 Case Length: 240mm Case Width: 80mm Case Height: 35mm Stone Length: 210mm Stone Width: 70mm Stone Height: 15mm Total Weight: 713g Nagura Included: No
Naniwa - Whetstone - Goken Arata - #3000
LAEAA-110-3000
Regular price
€82,95
Save €-82,95
Grit: #3000 Case Length: 240mm Case Width: 80mm Case Height: 35mm Stone Length: 210mm Stone Width: 70mm Stone Height: 15mm Total Weight: 707g Nagura Included: No
Naniwa - Whetstone - Goken Arata - #5000
LAEAA-110-5000
Regular price
€87,95
Save €-87,95
Grit: #5000 Case Length: 240mm Case Width: 80mm Case Height: 35mm Stone Length: 210mm Stone Width: 70mm Stone Height: 15mm Total Weight: 691g Nagura Included: No
NSK Kogyo - Diamond Nagura - #3000
Regular price
€29,95
Save €-29,95
Nagura
Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.
Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.
Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate.
NSK Kogyo - Diamond Stone - Diamond Nagura - #12000
Regular price
€38,95
Save €-38,95
Nagura
Nagura are very helpful in both increasing the efficiency of metal removal by adding grit on top of the stone, but also in creating unique, multi-grit slurry combinations important for polishing purposes. They can also be used to condition the surface of the sharpening stone after using a flattening plate or after extended periods of sharpening to remove particulate.
Stone Length: 210mm Stone Width: 70mm Stone Height: 15.6mm Stone Weight: 538g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Shapton - Whetstone - Professional Series - #320
adeaa-010-00320
Regular price
€43,95
Save €-43,95
Stone Length: 210mm Stone Width: 70mm Stone Height: 15.6mm Stone Weight: 494g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Suehiro - New Cerax - #320
Regular price
€43,95
Save €-43,95
Total Length: 230mm Total Height: 64mm Total Width: 90mm Stone Length: 210mm Stone Height: 22mm Stone Width: 78mm Total Weight: 1015g Grit: #320
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Tsuboman - Atoma Diamond Plate - #1200
lneyd-010-1200
Regular price
€79,95
Save €-79,95
Total Length: 210mm Total Height: 10mm Total Width:75mm Weight: 540g Grit: #1200
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Tsuboman - Atoma Diamond Plate - #1200 - Replacement Plate
LNEYD-020-1200
Regular price
€61,95
Save €-61,95
Intended to replace the upper surface of theAtom Diamond Sharpening Stone - #1200.
With use, diamond sharpening stone becomes worn and finer. When the diamond surface is worn to such an extent that it no longer serves its purpose, the top plate can be replaced with a replacement diamond plate that is glued to the aluminum base.
The back of the plate has a double-sided adhesive which makes it quick and easy to replace. The plate is made of 1mm thick stainless steel. Along with the base and adhesive tape, the plate measures 1.5mm. Be precise and pay close attention when applying the replacement plate to the aluminum base, it is important that the replacement plate is sitting flat and straight on the base.
We do not recommend using the replacement plate without the aluminum base.
Tsuboman - Atoma Diamond Plate - #140
LNEYD-010-140
Regular price
€87,95
Save €-87,95
Tsuboman - Atoma Diamond Plate - #140 - Replacement Plate
LNEYD-020-140
Regular price
€68,95
Save €-68,95
Intended to replace the upper surface of theAtom Diamond Sharpening Stone - #140.
With use, diamond sharpening stone becomes worn and finer. When the diamond surface is worn to such an extent that it no longer serves its purpose, the top plate can be replaced with a replacement diamond plate that is glued to the aluminum base.
The back of the plate has a double-sided adhesive which makes it quick and easy to replace. The plate is made of 1mm thick stainless steel. Along with the base and adhesive tape, the plate measures 1.5mm. Be precise and pay close attention when applying the replacement plate to the aluminum base, it is important that the replacement plate is sitting flat and straight on the base.
We do not recommend using the replacement plate without the aluminum base.
Tsuboman - Atoma Diamond Plate - #400
LNEYD-010-400
Regular price
€84,95
Save €-84,95
Tsuboman - Atoma Diamond Plate - #400 - Replacement Plate
LNEYD-020-400
Regular price
€65,95
Save €-65,95
Intended to replace the upper surface of theAtom Diamond Sharpening Stone - #400.
With use, diamond sharpening stone becomes worn and finer. When the diamond surface is worn to such an extent that it no longer serves its purpose, the top plate can be replaced with a replacement diamond plate that is glued to the aluminum base.
The back of the plate has a double-sided adhesive which makes it quick and easy to replace. The plate is made of 1mm thick stainless steel. Along with the base and adhesive tape, the plate measures 1.5mm. Be precise and pay close attention when applying the replacement plate to the aluminum base, it is important that the replacement plate is sitting flat and straight on the base.
We do not recommend using the replacement plate without the aluminum base.
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Tsuboman - Atoma Diamond Plate - #600 - Replacement Plate
LNEYD-020-600
Regular price
€63,95
Save €-63,95
Intended to replace the upper surface of theAtom Diamond Sharpening Stone - #600.
With use, diamond sharpening stone becomes worn and finer. When the diamond surface is worn to such an extent that it no longer serves its purpose, the top plate can be replaced with a replacement diamond plate that is glued to the aluminum base.
The back of the plate has a double-sided adhesive which makes it quick and easy to replace. The plate is made of 1mm thick stainless steel. Along with the base and adhesive tape, the plate measures 1.5mm. Be precise and pay close attention when applying the replacement plate to the aluminum base, it is important that the replacement plate is sitting flat and straight on the base.
We do not recommend using the replacement plate without the aluminum base.
