You may also like
Made In: Sanjo, Niigata - Japan
Line: Kengata Single Bevel Hatchet
Smith: Hinoura Blacksmith 日野浦刃物
Sharpener: Hinoura Blacksmith 日野浦刃物
Style: Single Bevel Kengata
Steel: Shirogami #2/White #2
Steel Type: Carbon
Edge Length: 193mm
Blade Height: 49.5mm
Blade Thickness: 5.3mm
Blade Construction: Awase, Ni-Mai
Blade Finish/Color: Kurouchi (forge finish)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Bolster: Iron
Pommel: N/A
Handle/Tang Construction: Partial Tang
Handle Material: Oak
Handle Length: 167mm
Total Length: 365mm
Weight: 395g
Sheath/Clip: Belt Sheath
Brand: Hitohira ひとひら (一片)
Line: Echizen
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 111mm
Blade Height: 43mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 225mm
Spine Length: 120mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 107mm
Weight: 169g
Saya/Guard: Purchased Separately
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 150mm
Blade Height: 55mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 276mm
Spine Length: 160mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 116mm
Weight: 260g
Saya/Guard: Purchased Separately
Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Line: Kikuchiyo x Rikichi
Profile: Yanagiba
Edge Length: 143mm
Blade Height: 25.5mm
Edge Steel: Aogami #2 (blue #2)
Steel Type: Carbon
Construction: Awase Ni-Mai (clad)
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Total Length: 290mm
Spine Length: 157mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 130mm
Weight: 81g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.