The Santoku is the other main multi-purpose knife in Japan, alongside the Gyuto. This is typically someone's first Japanese knife purchase unless they prefer slightly larger knives like the Gyuto/Chef.
Santoku typically range from ~165mm - ~180mm (6.5"-7"). Professionals tend to gravitate towards the longer lengths, and home users, those with smaller hands, or cramped kitchens tend to prefer the shorter lengths.
Santoku can have quite flat profiles (more edge contact with the board starting at the heel), with less belly, and a less pronounced tip vs. Gyuto/Chef knives, and are also generally taller for more of their length, giving them extended height. This profile shape allows Santoku to be slightly better geared toward chopping and push/pull cutting motions vs. the more forward rocking motion of a western Chef. The Santoku is sometimes colloquially called the Home Chef because its reduced length and less brittle tip vs. the Gyuto/Chef make it easier to use for the everyday user.
There is a variation on the Santoku profile with a clipped tip, called a Kiritsuke Santoku, although some people use the term Bunka (we use whichever term is used by the brand or craftsperson(s) when we label the knives). The tip is also known as a "K-tip", "diamond tip", "reverse tanto tip", and "kiritsuke tip," none of which should be confused with the Kiritsuke knife which is single bevel and a different knife entirely. This pointed tip allows for more adeptness and precision at the tip when needed, but is more brittle.
If this is a gift for someone it is a safer bet to choose a standard profile of shorter length, in stainless steel.
Hitohira - FJ - VG-10 - Santoku - 180mm - Pakka Western
AAA-347A-01-CA
Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki-Gifu, Japan
Profile: Santoku
Edge Length: 175mm
Blade Height: 46mm
Edge Steel: VG10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 177mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 122mm
Total Length: 297mm
Weight: 149g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.
Hitohira - FJ - VG10 - Bunka - 170mm - Western Handle
AAA-347A-01-CB
Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Hitohira - Imojiya - TH - Stainless - Bunka - 180mm - Ebony Handle
AAA-265S-04-CB180
Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 121g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.