Sakai Kikumori

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 168mm
Blade Height: 45mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 185mm
Thickness of Spine at Handle: 
Thickness ½ way:
Thickness ~1cm from Tip: 
Handle Length: 127mm
Total Length: 311mm
Weight: 155g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: KIKUZUKI RIN
Made in: Sakai, Osaka - Japan
Smith: Yoshikazu Tanaka  田中
Profile: Kiritsuke Santoku
Edge Length: 260mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Nashiji (Textured)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 272mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 140mm
Total Length: 411mm
Weight: 177g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Carbon Steel
This blade is carbon steel and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Smith: Tanaka Uchihamono 田中打刃物
Line: Client Custom
Profile: Gyuto
Edge Length: 259mm
Blade Height: 62.8mm
Edge Steel: Aogami Super/Blue Super
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double (symmetric)
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: N/A
Handle Material: N/A
Ferrule/Bolster Material: N/A
Spine Length: 271mm
Thickness of Spine at Handle: 2.9mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.4mm
Tang Length: 170mm
Total Length: 390mm
Weight: 241g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.