Hitohira - Imojiya TH - Damascus - 120mm Petty - Red Pakka Handle

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Goyon-Chazeau
Made in: Thiers - France
Line: Le Grande tradi
Profile: Utility
Edge Length: 125mm
Blade Height: 34.5mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Ebony w/ Sapwood
Ferrule/Bolster Material: N/A
Total Length: 237mm
Spine Length: 125mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 112mm
Weight: 93g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana S3
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 29.5mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Migaki. (Standard)
Bevel: Double (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Wood
Ferrule/Bolster Material: Ebony Wood
Spine Length: 165mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .5mm
Handle Length: 125mm
Total Length: 291mm
Weight: 67g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana SB
Profile: Petty
Edge Length: 140mm
Blade Height: 28mm
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
HRC: 61±1
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherrywood
Ferrule/Bolster Material: Ebony
Spine Length: 154mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 278mm
Weight: 66g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement:  This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand:  Hitohira ひとひら
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Petty
Edge Length: 122mm
Blade Height: 30mm
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Total Length:  256mm
Spine Length:  133mm
Thickness of Spine at Handle:  2.0mm
Thickness ½ way:  2.0mm
Thickness ~1cm from Tip:  1.7mm
Handle Length:  124mm
Weight:  67g
Saya/Guard:  N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.