Petty/Utility

Hitohira - Futana - S3 - Migaki- Petty - 150mm - Cherry Wood Handle

AAA-040-24-BA150

€141,95

Brand: Hitohira ひとひら
Line: Futana S3
Profile: Petty/Utility
Edge Length: 154mm
Blade Height: 29.5mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Migaki. (Standard)
Bevel: Double (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry Wood
Ferrule/Bolster Material: Ebony Wood
Spine Length: 165mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: .5mm
Handle Length: 125mm
Total Length: 291mm
Weight: 67g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Futana - S3 - Migaki- Petty - 150mm - Cherry Wood Handle

Hitohira - Futana - SB - Kurouchi Tsuchime - Petty 135mm - Cherrywood Handle

AAA-137T-24-BA135

€146,95

Brand: Hitohira ひとひら
Line: Futana SB
Profile: Petty
Edge Length: 140mm
Blade Height: 28mm
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
HRC: 61±1
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherrywood
Ferrule/Bolster Material: Ebony
Spine Length: 154mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 278mm
Weight: 66g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Hitohira - Futana - SB - Kurouchi Tsuchime - Petty 135mm - Cherrywood Handle

Hitohira - Harima - Super Blue - Stainless Clad - Kurouchi - 120mm Petty - Walnut Handle

AAA-720-02-BB

€92,95

Brand: Hitohira ひとひら
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Petty
Edge Length: 122mm
Blade Height: 30mm
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Total Length: 256mm
Spine Length: 133mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 124mm
Weight: 67g
Saya/Guard: N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Harima - Super Blue - Stainless Clad - Kurouchi - 120mm Petty - Walnut Handle

Hitohira - Hinode - White #2 - Nashiji - Petty - 195mm - Magnolia Handle (Oval)

BAA-102-BA195

€190,95

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Hitohira - Hinode - White #2 - Nashiji - Petty - 195mm - Magnolia Handle (Oval)

Hitohira - Imojiya - MZ VG-1 - 135mm Petty - Western Handle

AAA-268-09-BA135

€58,95

Brand: Hitohira ひとひら
Line: Imojiya MZ
Made in: Seki, Gifu - Japan
Profile: Petty
Edge Length: 135mm
Blade Height: 28mm
Edge Steel: VG-1
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 138mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 104mm
Total Length: 243mm
Weight: 60g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 135mm Petty - Western Handle

Hitohira - Imojiya - ST - Tsuchime Damascus - Petty 135mm - Western Handle

AAA-211-09-BA135

€82,95

Brand: Hitohira ひとひら
Line: Imojiya ST
Made in: Seki, Gifu - Japan
Profile: Petty
Edge Length: 137mm
Blade Height: 30mm
Edge Steel: VG-10
Steel Type: Stainless Steel
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 141mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 107mm
Total Length: 248mm
Weight: 87g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya - ST - Tsuchime Damascus - Petty 135mm - Western Handle

Hitohira - Imojiya - ST Tsuchime Damascus - 135mm Utility - Pakka Handle

DAA-181-BB

€87,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Utility
Edge Length: 136mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 255mm
Spine Length: 140mm
Blade Height: 34mm
Thickness: 1.7mm
Handle Length: 114mm
Weight: 94g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya - ST Tsuchime Damascus - 135mm Utility - Pakka Handle

Hitohira - Imojiya - ST Tsuchime Damascus - 150mm Petty - Pakka Handle

daa-181-ba150

€82,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Petty
Edge Length: 150mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 272mm
Spine Length: 157mm
Blade Height: 28mm
Thickness: 1.7mm
Handle Length: 113mm
Weight: 92g
Saya/Guard: No

Hitohira - Imojiya - ST Tsuchime Damascus - 150mm Petty - Pakka Handle

Hitohira - Imojiya - TH Damascus - 180mm Petty - Red Pakka Handle

AAA-265R-01-BA180

€175,95

Brand: Hitohira ひとひら (一片)
Made In: Seki, Gifu - Japan
Line: TH Damascus
Profile: Petty
Edge Length: 174mm
Blade Height: 27mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless Damascus
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Red Pakka Wa
Total Length: 306mm
Spine Length: 190mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Weight: 90g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya - TH Damascus - 180mm Petty - Red Pakka Handle

Hitohira - Imojiya KT - VG10 - Damascus - 150mm Petty - Western Micarta Handle

AAA-255-03-BA150

€131,95

Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 257mm
Edge Length: 151mm
Spine Length: 155mm
Blade Height: 32mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 100mm
Weight: 96g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya KT - VG10 - Damascus - 150mm Petty - Western Micarta Handle

Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

daa-180-ba135

€92,95

Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Size: 135mm
Steel Type: Carbon
Steel: Aogami #2 (Blue #2), Soft Stainless Clad
Handle: Pakka Western
Total Length: 240mm
Edge Length: 132mm
Handle to Tip Length: 134mm
Blade Height: 25mm
Thickness: 1.6mm
Handle Length: 102mm
Weight: 77g
Hand Orientation: Ambidextrous

Saya/Guard: Sold Separately

Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

Hitohira - Imojiya MZ - Tsuchime Migaki - 135mm Petty - Pakka Handle

AAA-267-BA

€63,95

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: Imojiya MZ
Profile: Petty
Edge Length: 134mm
Blade Height: 28mm
Edge Steel: VG-1
Steel Type: Stainless Steel
Construction: Awase, San Mai
Cladding: Soft Stainless
Finish: Tsuchime MIgaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 137mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 104mm
Total Length: 241mm
Weight: 76g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - Tsuchime Migaki - 135mm Petty - Pakka Handle

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

AAA-268-01-ZC135

€73,95

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Children's Santoku
Edge Length: 130mm
Blade Height: 40mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 250mm
Spine Length: 143mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

Hitohira - Imojiya TH - Damascus - 120mm Petty - Red Pakka Handle

AAA-265R-01-BA120

€136,95

Brand: Hitohira ひとひら (一片
Made in: Seki-Gifu/ Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 112mm
Blade Height: 27mm
Edge Steel: VG-10
Steel Type: Stainless Steel
Construction: Awase, San Mai
Cladding: Stainless Clad
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 128mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 115mm
Total Length: 243mm
Weight: 73g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Damascus - 120mm Petty - Red Pakka Handle

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

AAA-266Z4-01-BA150

€73,95

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

Hitohira - T10 - 130mm Petty - Western Handle

daa-010-ba130

€121,95

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: V10 Special, Soft Stainless Clad
Handle: Pakka Western
Total Length: 245mm
Edge Length: 134mm
Handle to Tip Length: 136mm
Blade Height: 27mm
Thickness: 1.2mm
Handle Length: 110mm
Weight: 70g
Hand Orientation: Ambidextrous
Hardness: 61-62HRC

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - T10 - 130mm Petty - Western Handle

Hitohira - TD - Blue #2 - Stainless Clad Kurouchi - 135mm Petty - Walnut Handle

AAA-615B2KT-02-BA135

€116,95

Brand: Hitohira ひとひら (一片)
Line: TD
Profile: Petty
Edge Length: 137mm
Edge Steel: Blue #2
Steel Type: Carbon
Cladding: Stainless Kurouchi
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Walnut
Total Length: 256mm
Spine Length: 151mm
Handle Length: 105mm
Blade Height: 31mm
Thickness of Spine at Handle: 3.2mm
Thickness of Spine Half Way: 2.7mm
Thickness of Spine ~1cm from Tip: 2.1mm
Weight: 78g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This knife is vintage and may include slight scratches, tarnish spots, etc. that it may have picked up over the decades.

Hitohira - TD - Blue #2 - Stainless Clad Kurouchi - 135mm Petty - Walnut Handle

Hitohira - Tosa - Kurouchi - Blue #2 - 135mm Petty - Walnut Handle (Rengas Ferrule)

AAA-458-2-02-BA135

€131,95

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty
Edge Length: 136mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Rengas
Spine Length: 150mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 115mm
Total Length: 263mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tosa - Kurouchi - Blue #2 - 135mm Petty - Walnut Handle (Rengas Ferrule)

Hitohira - Tosa - Kurouchi - Blue #2 - 135mm Petty - Walnut Handle (Ziricote Ferrule)

AAA-458-02-BA135

€131,95

Brand: Hitohira ひとひら
Made in: Tosa-Kochi/ Japan
Line: Tosa
Profile: Petty
Edge Length: 135mm
Blade Height: 36mm
Edge Steel: Blue (Aogami) #2
Steel Type: Carbon Steel
Construction: Awase, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 148mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 114mm
Total Length: 262mm
Weight: 70g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Tosa - Kurouchi - Blue #2 - 135mm Petty - Walnut Handle (Ziricote Ferrule)

Morihei - Hisamoto - Inox - 150mm - Petty - Western Handle

aaa-010-ba150

€77,95

Brand: Morihei 森平
Line: Hisamoto INOX
Profile: Petty/Utility
Edge Length: 150mm
Edge Steel: SUS-440
Steel Type: Stainless
HRC: 58-60
Cladding: N/A (Mono-Steel)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle: Western (Pakka)
Total Length: 255mm
Spine Lengh 160mm
Blade Height: 28mm
Thickness: 1.6mm
Handle Length: 104mm
Weight: 81g
Saya/Guard: Sold Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Morihei - Hisamoto - Inox - 150mm - Petty - Western Handle

RYUSEN - TANGANRYU - VG10 Tsuchime Damascus - 150mm Petty - Maple Handle

TG-606

€355,95

Brand: Ryusen 株式会社龍泉刃物
Line: Tangan Ryu
Profile: Petty/Utility
Edge Steel: VG10
Steel Type: Stainless
Hardness: 60HRC
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Asymmetric
Handle: Curly Maple
Total Length: 268mm
Edge Length: 146mm
Spine Length: 162mm
Blade Height: 31mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm
Handle Length: 105mm
Weight: 75g