Hitohira - Imojiya - SG2 - 75mm Paring - Western Handle

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 105mm
Blade Height: 30mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 220mm
Spine Length: 115mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Coutellerie Chambriard
Profile: Paring
Steel Type: Swedish 14C28N stainless
Hand Orientation: Ambidextrous
Handle: Western Juniper
Total Length: 180mm
Edge Length: 85mm
Spine Length: 87mm
Blade Height: 16mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 95mm
Weight: 65g
Saya/Guard: Brown Leather Sheath

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Kedma
Profile: Paring
Edge Length: 120mm
Blade Height: 29mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Stacked Octagonal
Handle Material: Black Micarta & Black Leather
Ferrule/Bolster Material: Brass
Total Length: 225mm
Spine Length: 128mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 98mm
Weight: 81g
Saya/Guard: Purchased Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: HADO
Smith: Shogou Yamatsuka
Sharpener: Tadataka Maruyama
Profile: Paring
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Material : Urushi 
Total Length: 195mm
Edge Length: 87mm
Spine Length: 95mm
Blade Height: 26mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 100mm
Weight: 40g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: HG
Profile: Petty
Edge Length: 80mm
Edge Steel: VG10
Steel Type: Stainless
Bevel: Double
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Black Pakka Handle
Total Length: 194mm
Spine Length: 85mm
Handle Length: 105mm
Blade Height: 19mm
Thickness of Spine at Handle: 1.3mm
Thickness of Spine Half Way:  1.1mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 63g
Saya/Guard: N/A