Brand: Hitohira ひとひら (一片)
Line: HG
Profile: Petty
Edge Length: 80mm
Edge Steel: VG10
Steel Type: Stainless
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black Pakka Handle
Total Length: 194mm
Spine Length: 85mm
Handle Length: 105mm
Blade Height: 19mm
Thickness of Spine at Handle: 1.3mm
Thickness of Spine Half Way: 1.1mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 63g
Saya/Guard: N/A
Brand: Coutellerie Chambriard
Profile: Paring
Steel Type: Swedish 14C28N stainless
Hand Orientation: Ambidextrous
Handle: Western Juniper
Total Length: 180mm
Edge Length: 85mm
Spine Length: 87mm
Blade Height: 16mm
Thickness at Spine: 2.4mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 95mm
Weight: 65g
Saya/Guard: Brown Leather Sheath
Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Brand: Florentine Kitchen Knives
Made in: Barcelona, Spain
Line: Kedma
Profile: Paring
Edge Length: 120mm
Blade Height: 29mm
Edge Steel: Sandvik 14C28N
Steel Type: Stainless
Grind: Convex
Construction: Mono-Steel
Finish: Satin/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Stacked Octagonal
Handle Material: Black Micarta & Black Leather
Ferrule/Bolster Material: Brass
Total Length: 225mm
Spine Length: 128mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 98mm
Weight: 81g
Saya/Guard: Purchased Separately
Brand: Hitohira ひとひら
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Paring
Edge Length: 94mm
Blade Height: 33mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Nashiji (textured)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Right-Handed
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 106mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 115mm
Total Length: 220mm
Weight: 52g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
CARE ADVISEMENTS
This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら
Made in: Seki-Gifu/ Japan
Line: Imojiya ST
Profile: Paring
Edge Length: 82mm
Blade Height: 23mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 59±1HRC
Construction: Awase, San Mai
Cladding: Soft Stainless
Finish: Tsuchime Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 87mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 108mm
Total Length: 193mm
Weight: 70g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
