In stock

Morihei - Sentei Mushibane Spring Replacement - Medium

€2,95

Hitohira - Kiri Box - 210mm Knife w/o Saya

€46,95

Can hold 300mm knives without their saya on, can fit shorter sizes with saya on.

Overall External Dimensions: 430mm x 85mm x 45mm

Overall Internal Dimensions: 415mm x 70mm x 35mm

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Kiri Box - 210mm Knife w/o Saya

Benriner - 64mm Edge Replacement - Medium Tooth

€8,95

Replacement Medium Tooth Blade for all 64mm Benriner Mandoline.

Benriner - 64mm Edge Replacement - Medium Tooth

Benriner - 95mm Edge Replacement - Fine Tooth

€11,95

Replacement Fine Tooth Blade for all 95mm Benriner Mandoline.

Benriner - 95mm Edge Replacement - Fine Tooth

Benriner - 95mm Edge Replacement - Medium Tooth

€7,95

Replacement Medium Tooth Blade for all 95mm Benriner Mandoline.

Benriner - 95mm Edge Replacement - Medium Tooth

Benriner - 95mm Edge Replacement - Rough Tooth

€7,95

Replacement Rough Tooth Blade for all 95mm Benriner Mandoline.

Benriner - 95mm Edge Replacement - Rough Tooth

Benriner - 64mm Edge Replacement - Rough Tooth

€7,95

Replacement Rough Tooth Blade for all 64mm Benriner Mandoline.

Benriner - 64mm Edge Replacement - Rough Tooth

Benriner - 64mm Edge Replacement - Medium Tooth

€7,95

Morihei - Sentei Senbane Spring Replacement - Large

€2,95

Hitohira - Kikuchiyo x Mosuke - Kikko - Blue #1 - 300mm Yanagiba - Ziricote Handle - Saya

€651,95

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Made in: Sakai, Osaka - Japan
Line: Blue #1 Kikko
Profile: Yanagiba
Edge Length: 288mm
Blade Height: 36mm
Edge Steel: Blue #1
Steel Type: Carbon
Construction: Awase/Clad, Nimai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal Wa
Handle Material: Ziricote
Ferrule/Bolster Material: Buffalo Horn
Total Length: 448mm
Spine Length: 303mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 145mm
Weight: 235g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Kikuchiyo x Mosuke - Kikko - Blue #1 - 300mm Yanagiba - Ziricote Handle - Saya

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

€370,95

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 259mm
Blade Height: 40mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Jutan Wood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 272mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm
Weight: 149g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Jutan Handle

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

€234,95

Brand: Hitohira ひとひら (一片)
Made in: Echizen-Fukui/ Japan
Line: Setsu Forged VG10 Damascus
Profile: Sujihiki
Edge Length: 258mm
Blade Height: 39mm
Edge Steel: VG10
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Black Pakka
Total Length: 410mm
Spine Length: 270mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 135g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Setsu Forged - VG10 Damascus - 255mm Sujihiki - Rosewood Handle

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

€538,95

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: FJ SG2 Mirror
Profile: Bunka
Edge Length: 179mm
Blade Height: 47mm
Edge Steel: SG2 Powder Metal
Steel Type: Stainless
Grind: Convex
Construction: Awase Clad
Cladding: Stainless
Finish: Mirror
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Linen Micarta
Ferrule/Bolster Material: Stainless Steel
Total Length: 296mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Weight: 173g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - FJ SG2 - 180mm Bunka - Western Linen Micarta Handle - Mirror Polished

Morihei - Hisamoto - White #1 - Stainless Clad - Tsuchime - 210mm Gyuto - Pakka Western

€370,95

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto Stainless Clad
Profile: Gyuto
Edge Length: 213mm
Blade Height: 50mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Stainless
Finish: Tsuchime, Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 340mm
Spine Length: 214mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 125mm
Weight: 220g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Morihei - Hisamoto - White #1 - Stainless Clad - Tsuchime - 210mm Gyuto - Pakka Western

Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - Mirror Polished - 210mm Kiritsuke - Ebony Handle

€651,95

Brand: Hitohira ひとひら (一片)
Blacksmith: Kikuchiyo 菊千代
Sharpener: Mosuke モスケ
Made in: Sakai, Osaka - Japan
Line: Enmon
Profile: Kiritsuke
Edge Length: 200mm
Blade Height: 42mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Grind: Right Handed Convex
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Mirror Polished Hira, Kasumi Damascus Kireha
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle Shape: Oval Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Total Length: 355mm
Spine Length: 210mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.3mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 140mm
Weight: 205g
Saya/Guard: Magnolia Saya

Hitohira - Kikuchiyo x Mosuke - Enmon - White #1 Damascus - Mirror Polished - 210mm Kiritsuke - Ebony Handle

Hitohira - Kikuchiyo x Rikichi - Silver #3 - 300mm Yanagiba - Magnolia Handle

€327,95

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Made in: Sakai, Japan
Line: Silver #3
Profile: Yanagiba
Edge Length: 290mm
Blade Height: 35mm
Edge Steel: Ginsanko (Silver #3)
Steel Type: Stainless
Grind: Single Bevel
Construction: Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single Bevel
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Horn
Total Length: 445mm
Spine Length: 310mm
Thickness of Spine at Handle: 4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 142mm
Weight: 200g
Saya/Guard: Purchased Separately

Hitohira - Kikuchiyo x Rikichi - Silver #3 - 300mm Yanagiba - Magnolia Handle

Nigara Hamono - Spare Handle - 210mm Gyuto - Karin Wood, Double Blonde Horn, 2 Silver Spacers

€210,95

Brand: Nigara Hamono
Material: Karin Wood, Blonde Horn, Sliver Nickle Spacer
Length: 138.8mm
Dimensions at Top: 23mm x 19mm
Dimensions at Bottom: 28mm x 24mm
Weight: 76g

Nigara Hamono - Spare Handle - 210mm Gyuto - Karin Wood, Double Blonde Horn, 2 Silver Spacers

Nigara Hamono - Spare Handle - 240mm Gyuto - Karin Wood, Double Blonde Horn, 3 Silver Spacers

€276,95

Brand: Nigara Hamono
Material: Karin Wood, Blonde Horn, Sliver Nickle Spacer
Length: 143mm
Dimensions at Top: 23mm x 19mm
Dimensions at Bottom: 27mm x 22mm
Weight: 81g

Nigara Hamono - Spare Handle - 240mm Gyuto - Karin Wood, Double Blonde Horn, 3 Silver Spacers

Nigara Hamono - Blue #2 Damascus - 300mm Sakimaru Yanagiba - Karin Burl w/ Double Blonde Horn & Triple Nickel Spacer Handle

€1.639,95

Brand: Nigara Hamono 二唐刃物鍛造所
Smith: Yoshizawa Gou 吉澤剛
Sharpener: Yoshizawa Shu 吉澤州
Made in: Hirosaki, Aomori - Japan
Line: Blue #2 Damascus
Profile: Sakimaru Yanagiba
Edge Length: 300mm
Blade Height: 42mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Construction: Awase Ni-Mai
Cladding: Soft Iron
Finish: Forced Patina Damascus
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Octagonal Wa
Handle Material: Karin Burl Wood, Nickel Silver Spacers
Ferrule/Bolster Material: Blonde Buffalo Horn Ferrule and Pommel
Total Length: 456mm
Spine Length: 312mm
Thickness of Spine at Handle: 5.3mm
Thickness ½ way: 3.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 143mm
Weight: 345g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Nigara Hamono - Blue #2 Damascus - 300mm Sakimaru Yanagiba - Karin Burl w/ Double Blonde Horn & Triple Nickel Spacer Handle

Sakai Kikumori - Nakagawa - VG10 - Damascus - 300mm Kiritsuke Yanagiba - Magnolia Handle

€609,95

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10
Profile: Kiritsuke Yanagiba
Edge Length: 289mm
Blade Height: 40.5mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase Ni-Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Magnolia Wood
Total Length: 458mm
Spine Length: 305mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 146mm
Weight: 204g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Sakai Kikumori - Nakagawa - VG10 - Damascus - 300mm Kiritsuke Yanagiba - Magnolia Handle

Sakai Kikumori - Nakagawa - VG10 - Damascus - 300mm Yanagiba - Magnolia Handle

€557,95

Brand: Sakai Kikumori 堺菊守
Made in: Sakai, Osaka - Japan
Line: Nakagawa VG10 Damascus
Profile: Yanagiba
Edge Length: 291mm
Blade Height: 41mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Awase Ni-Mai
Cladding: Soft Stainless
Finish: Damascus
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-Handed
Handle: Magnolia Wood, Black Buffalo Horn
Total Length: 450mm
Spine Length: 305mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 2.4mm
Handle Length: 145mm
Weight: 208g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.