lionSTEEL - Folding Knife - MYTO - M390 - 85mm - Frame Lock - Red Aluminum - Stonewashed

Brand: Hitohira ひとひら
Line: Futana
Made in: japan
Profile: Santoku
Edge Length: 168mm
Blade Height: 47mm
Edge Steel: SUS-440
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Migaki
Bevel: Double Bevel (symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: D-Shape
Handle Material: Magnolia Wood
Ferrule/Bolster Material: 
Spine Length: 185mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 134mm
Total Length: 318mm
Weight: 110g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: TD
Made in: Sanjo, Niigata - Japan
Profile: Honesuki Kaku
Edge Length: 155mm
Blade Height: 40mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Maple
Spine Length: 173mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 124mm
Total Length: 296mm
Weight: 113g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is semi-stainless and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Echizen, Fukui - Japan
Profile: Shakekiri
Edge Length: 241mm
Blade Height: 68mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval
Handle Material: Poplar
Ferrule/Bolster Material: Plastic Ferrule
Spine Length: 255mm
Thickness of Spine at Handle: 5.2mm
Thickness ½ way: 5.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 143mm
Total Length: 396mm
Weight: 288g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics. 

Brand: Hitohira ひとひら
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Santoku
Edge Length: 181mm
Blade Height: 52mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Kurouchi/Nashiji
Bevel: Double Bevel (Symmetrical) 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Quince Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 202mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 133mm
Total Length: 333mm
Weight: 161g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Ashi, White #2
Made in: Sakai, Osaka - Japan
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 39mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A, Mono-Steel
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 277mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 405mm
Weight: 188g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Echizen NB
Made in: Echizen, Fukui - Japan
Profile: Nakiri/Vegetable
Edge Length: 163mm
Blade Height: 53mm
Edge Steel: Shirogami #2/ White #2
HRC: ±63
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Rengas
Spine Length: 179mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 307mm
Weight: 145g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.