New!

Brand: MOKI モキナイフ 
Made In:  Seki-Gifu, Japan
Line: Berg
Style: Fixed Blade
Profile: Drop Point
Grind: Convex
Blade Steel: VG-7  
Steel Type: Stainless
Blade Length: 110mm
Blade Height: 38mm
Blade Thickness: 4.5mm
Blade Construction: Awase (clad) 
Handle/Tang Construction: Full Tang 
Bolster: N/A
Pommel: N/A
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Length: 117mm 
Total Length: 229mm 
Weight: 197g 
Sheath/Clip: Leather sheath included 
Lanyard Hole: Yes

Brand: Nigara Hamono 二唐刃物鍛造所
Made in: Aomori - Japan
Line: SG STRIX
Profile: Petty/Utility
Edge Length: 120mm
Blade Height: 40mm
Edge Steel: SPG STRIX
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 129mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 120mm
Total Length: 125mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sanjo-Niigata/ Japan
Line: TD
Profile: Petty/Utility
Edge Length: 100mm
Blade Height: 41mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: D-Shape 
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 111mm
Thickness of Spine at Handle: 3.0mm
Thickness ½ way: 2.7mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 115mm
Total Length: 227mm
Weight: 69g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira
Made in: Seki, Gifu - Japan
Profile: Honesuki
Steel: Undisclosed Semi-stainless
Steel Type: Semi-stainless
Edge Length: 153mm
Blade Height: 39mm
Construction: Mono
Bevel: Asymmetrical
Hand Orientation: Right
Handle Shape: Rectangular 
Handle Material: Elastomer
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: .4mm
Handle Length: 115mm
Total Length: 268mm
Weight: 116g
Saya/Guard: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Kogetsu 五香刃物 
Made in: Chiba/ Japan
Smith: Goko Hamono 五香刃物製作所
Line: Mandai 
Profile: Petty/Utility
Edge Length: 150mm
Blade Height: 31mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless Steel
Spine Length: 155mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 106mm
Total Length: 260mm
Weight: 100g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: HADO
Line: Shiosai
Made in: Sakai, Osaka - Japan
Sharpener: Tadataka Maruyama
Profile: Ko Bunka
Edge Length: 128mm
Blade Height: 46mm
Edge Steel: SG2
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Oak
Ferrule/Bolster Material: N/A
Spine Length: 143mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: .8mm
Handle Length: 129mm
Total Length: 270mm
Weight: 114g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Kikuzuki Uzu
Made in: Sakai - Japan
Smith: Tanaka Uchihamono 田中打刃物
Profile: Petty/Utility
Edge Length: 140mm
Blade Height: 29mm
Edge Steel: Aogami #1 (blue #1)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron Damascus
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 152mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 124mm
Total Length: 275mm
Weight: 65g
Saya/Guard: Sold Separately 

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Hitohira ひとひら 
Line: HG Tsuchime Damascus
Made in: Seki-Gifu, Japan
Profile: Petty
Edge Length: 155mm
Blade Height: 29mm
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: Symmetrical
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 161mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 285mm
Weight: 77g
Saya/Guard: Sold Separtely

Brand: Hitohira ひとひら
Line: Imojiya TH
Made in: Seki, Gifu - Japan 
Profile: Utility/Petty
Edge Length: 120mm
Blade Height: 27.7mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: Soft Stainless
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 120mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: .9mm
Handle Length: 103mm
Total Length: 228mm
Weight: 78mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nigara 二唐刃物鍛造所
Line: VG Xeos
Made in: Hirosaki, Aomori - Japan
Smith: Nigara Hamono
Profile: Petty
Edge Length: 150mm
Blade Height: 31.5mm
Edge Steel: VG Xeos
Steel Type: Stainless
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 164mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .6mm
Handle Length: 115mm
Total Length: 278mm
Weight: 87mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Tosa, Kochi - Japan
Profile: Santoku
Edge Length: 124mm
Blade Height: 38.6mm
Edge Steel: Aogami #1 (Blue #1)
Steel Type: Carbon
Construction: Awase (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double Bevel (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Ziricote
Spine Length: 135mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1mm
Handle Length: 115mm
Total Length: 247mm
Weight: 74g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Hinode
Made in: Sanjo, Niigata - Japan
Smith: Mutsumi Hinoura 日野浦 睦
Profile: Petty/Utility
Edge Length: 196mm
Blade Height: 38.7mm
Edge Steel: Shirogami #2 (white #2)
Steel Type: Carbon
Construction: Awase San-Mai (clad)
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: .2mm
Handle Length: 134mm
Total Length: 345mm
Weight: 127g
Saya/Guard: Sold Separately

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: Imojiya TH
Profile: Honesuki Kaku
Edge Length: 150mm
Blade Height: 38mm
Edge Steel: Yasuki Blue (Aogami) Super
Steel Type: Carbon
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless 
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 158mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 140mm
Total Length: 298mm
Weight: 124g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka/ Japan 
Smith: Kikuchiyo 菊千代 
Sharpener: Rikichi 利吉
Line: Kikuchiyo x  Rikichi 
Profile: Sakai-Osaka/ Japan
Edge Length: 141mm
Blade Height: 26mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Carbon
Construction: Awase/Clad, Ni-Mai
Cladding: Soft Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Ho Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 154mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 131mm
Total Length: 289mm
Weight: 83g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Petty
Edge Length: 127mm 
Blade Height: 36mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 140mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 113mm
Total Length: 252mm
Weight: 115g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Nakiri
Edge Length: 150mm
Blade Height: 53mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 166mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Total Length: 294mm 
Weight: 186g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Petty/Utility
Edge Length: 123mm
Blade Height: 33mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 136mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 119 mm
Total Length: 250mm 
Weight: 112g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: MOKI モキナイフ
Made In: Seki, Gifu - Japan
# In Set: 1
Blade Steel: AUS-8
Steel type: Stainless
Blade Length: 100mm
Blade Height: 9mm
Blade Construction: Zenko (mono-steel)
Bolster: Stainless
Handle Material: Linen Micarta
Handle Color: Black
Blade Finish/Color: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 100mm
Total Length: 219mm
Spine Thickness: 1.8mm
Weight: 57g
Storage: Leather Sheath

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 
Blade Height: 
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 68mm
Spine Length: 40mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 125mm
Weight: 95g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand:  Hitohira ひとひら
Made in: Miki, Hyogo - Japan
Line: Harima
Profile: Petty
Edge Length: 122mm
Blade Height: 30mm
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Construction: Awase
Cladding: Soft Stainless Clad
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Total Length:  256mm
Spine Length:  133mm
Thickness of Spine at Handle:  2.0mm
Thickness ½ way:  2.0mm
Thickness ~1cm from Tip:  1.7mm
Handle Length:  124mm
Weight:  67g
Saya/Guard:  N/A

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.