Full Circle Craftworks Knives - Carbon Stormcloud - 7" Chef - Osage Orange Handle

Brand: Theo Darvin
Line: Hybrid
Made in: Portland, Maine - USA
Smith: Theo Darvin
Sharpener: Theo Darvin
Profile: Nakiri/Vegetable
Edge Length: 140mm
Blade Height: 49.3mm
Edge Steel: AEB-L
Steel Type: Stainless
Construction: Mono-Steel (zenko)
Cladding: N/A (mono-steel)
Finish: Satin/Brushed
Bevel: Double 
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Ebony
Ferrule/Bolster Material: N/A
Spine Length: 165mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Total Length: 277mm
Weight: 202g
Saya/Guard: Sold Separately

Handmade in Maine by Theo Darvin.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Full Circle Craftworks
Made in: Maine, USA
Profile: Gyuto
Edge Length: 190mm
Blade Height: 59mm
Edge Steel: 
Steel Type: Carbon
Construction: Mono Steel
Finish: Stormcloud Patina
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Unique Western
Handle Material: Padauk
Total Length: 350mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.2m
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 175mm
Weight: 160g
Saya/Guard: Custom Made Wooden Box

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Full Circle Craftworks
Location: Maine, United States
Profile: Nakiri
Edge Length: 160mm
Edge Steel: Vintage Carbon
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Redheart Wood
Total Length:  317mm
Spine Length:  166mm
Handle Length: 160mm
Blade Height:  38mm
Thickness of Spine at Handle: 1.2mm
Thickness of Spine Half Way:  1.2mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 151g
Saya/Guard: Handmade Wooden Box

Made from high carbon tool steel from turn of the century American timber saws. Redheart wood handle, Stainless Steel pins, and forced "Stormcloud" patina on the blade.  Knife comes with a custom bamboo and walnut box.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Soma Metalwork
Smith: Kiran Chapman
Sharpener: Kiran Chapman
Made in: North Yarmouth, ME
Line: Standard Chef's Set
Profile: Kiritsuke Petty
Edge Length: 112mm
Blade Height: 40mm
Edge Steel: 80CRV2
Steel Type: Carbon
Grind: Wide Bevel
Construction: Mono-Steel
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Walnut
Total Length: 253mm
Spine Length: 117mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 140mm
Weight: 72g
Saya/Guard:  Purchased Separately

Handmade in Maine by Soma Metalwork.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.