Culinary Knives

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 217mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 373mm
Spine Length:  230mm
Blade Height: 47mm
Thickness: 1.7mm
Handle Length: 142mm
Weight: 154g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Futana SB
Profile: Petty
Edge Length: 140mm
Blade Height: 28mm
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
HRC: 61±1
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi (Forge Finish), Tsuchime (Hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherrywood
Ferrule/Bolster Material: Ebony
Spine Length: 154mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 125mm
Total Length: 278mm
Weight: 66g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement:  This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: White #2 Migaki Tsuchime
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: White #2
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Migaki Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 376mm
Spine Length: 230mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 145mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Petty
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Western, Imitation Mahogany
Total Length: 248mm 
Edge Length: 140mm 
Spine Length: 143mm 
Handle Length: 105mm 
Blade Height: 28mm 
Thickness of Spine at Handle: 1.5mm 
Thickness of Spine Half Way: 1.3mm 
Thickness of Spine ~1cm from Tip: .5mm 
Weight: 92g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 288mm 
Edge Length: 160mm 
Spine Length: 170mm 
Handle Length: 117mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.5mm 
Thickness of Spine ~1cm from Tip: 1.5mm 
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 307mm 
Edge Length: 185mm 
Spine Length: 184mm 
Handle Length: 128mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.6mm 
Thickness of Spine Half Way: 1.6mm 
Thickness of Spine ~1cm from Tip: 1.2mm 
Weight: 177g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 335mm
Edge Length: 215mm
Spine Length: 127mm
Handle Length: 104mm
Blade Height: 46mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 184g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki, Gifu - Japan 
Line: HG
Profile: Santoku
Edge Length: 185mm
Blade Height: 45mm
Edge Steel: Unclassified Stainless
Steel Type: Stainless Steel
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Tsuchime Damascus 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous  
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 196mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.7mm
Handle Length: 135mm
Total Length: 330mm
Weight: 136g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya Kuma
Profile: Nakiri
Edge Length: 160mm
Blade Height: 48.5mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Construction: Awase (Clad)
Cladding: Soft Iron
Finish: Tsuchime/Nashiji
Bevel: Double Bevel (Symmetrical)
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Spine Length: 168mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 290mm
Weight: 167g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Imojiya ST
Made in: Seki, Gifu - Japan
Profile: Petty
Edge Length: 137mm
Blade Height: 30mm
Edge Steel: VG-10
Steel Type: Stainless Steel
Construction: Awase (clad)
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 141mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 107mm
Total Length: 248mm
Weight: 87g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Imojiya VG-10 
Smith: Seto 瀬戸 
Producing Area: Seki-Gifu/ Japan 
Profile: Utility
Edge Length: 136mm
Edge Steel: VG-10
Steel Type: Stainless 
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal 
Total Length: 255mm
Spine Length: 140mm
Blade Height: 34mm
Thickness: 1.7mm
Handle Length: 114mm
Weight: 94g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki/Gifu - Japan
Profile: Gyuto
Edge Length: 203mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 323mm
Spine Length: 207mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 121mm
Weight: 167g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: Imojiya MZ
Profile: Petty
Edge Length: 134mm
Blade Height: 28mm
Edge Steel: VG-1
Steel Type: Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless
Finish: Tsuchime MIgaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western 
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 137mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 104mm
Total Length: 241mm
Weight: 76g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki, Gifu - Japan 
Line: Imojiya MZ
Profile: Santoku/Home Chef
Edge Length: 168mm
Blade Height: 46mm
Edge Steel: VG-1
Steel Type: Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless
Finish: Tsuchime (hammered), Migaki (standard)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western 
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 178mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.8mm
Handle Length: 118mm
Total Length: 291mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya ST
Profile: Santoku
Edge Length: 170mm
Hardness: 59±1HRC
Steel Type: Stainless
Steel: VG-10
Cladding: Stainless Damascus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Wa
Total Length: 296mm
Spine Length: 173mm
Handle Length: 123mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.4mm
Weight: 176g
Saya/Guard: Purchased Separately

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10 
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 306mm
Edge Length: 180mm
Spine Length: 185mm
Blade Height: 45mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 1.2mm
Handle Length: 121mm
Weight: 167g
Saya/Guard: Purchased Separately.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10 
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 240mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 375mm
Spine Length: 245mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.9mm
Handle Length: 128mm
Weight: 232g
Saya/Guard: Purchased Separately.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki-Gifu/ Japan
Line: ST Tsuchime Damascus Western
Profile: Sujihiki
Edge Length: 237mm
Blade Height: 39mm
Edge Steel: VG-10
Steel Type: Stainless
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Damascus Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Imitation Mahogany
Ferrule/Bolster Material: Stainless
Total Length: 363mm
Spine Length: 241mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.