Brand: Hitohira ひとひら Made in: Seki-Gifu/ Japan Line: KH Profile: Petty Edge Length: 120mm Blade Height: 27mm Edge Steel: Unclassified Stainless Steel Steel Type: Stainless Steel Construction: Mono-Steel Cladding: N/A Finish: Migaki Bevel: Double Bevel Symmetry: 30:70 Hand Orientation: Right-Handed Handle Shape: Octagonal Handle Material: Keyaki Zelkova Ferrule/Bolster Material: N/A Total Length: 245mm Spine Length: 129mm Thickness of Spine at Handle: 2.0mm Thickness ½ way: 1.7mm Thickness ~1cm from Tip: 1.0mm Handle Length: 115mm Weight: 46g Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Hitohira - Kikuchiyo x Rikichi - Silver #3 - 270mm Yanagiba - Ho Wood Handle - Saya
Regular price
€304,95
Save €-304,95
Brand: Hitohira ひとひら (一片) Smith: Kikuchiyo 菊千代 Sharpener: Rikichi 利吉 Made in: Sakai, Osaka, Japan Line: Silver #3 Profile: Yanagiba Edge Length: 262mm Blade Height: 36mm Edge Steel: Silver #3 (Ginsanko) Steel Type: Stainless Grind: Single Bevel Construction: Ni-Mai Cladding: Stainless Finish: Migaki Bevel: Single Bevel Symmetry: 100/0 Hand Orientation: Right Handed Handle Shape: Octagonal Handle Material: Magnolia Ferrule/Bolster Material: Buffalo Horn Total Length: 415mm Spine Length: 275mm Thickness of Spine at Handle: 3.8mm Thickness ½ way: 2.9mm Thickness ~1cm from Tip: 1.2mm Handle Length: 137mm Weight: 170g Saya/Guard: Included
Please note:These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement:This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - T10 - 130mm Petty - Western Handle
Regular price
€117,95
Save €-117,95
Brand: Hitohira ひとひら (一片) Producing Area: Echizen-Fukui/ Japan Profile: Petty Size: 130mm Steel Type: Stainless Steel Steel: V10 Special, Soft Stainless Clad Handle: Pakka Western Total Length: 245mm Edge Length: 134mm Handle to Tip Length: 136mm Blade Height: 27mm Thickness: 1.2mm Handle Length: 110mm Weight: 70g Hand Orientation: Ambidextrous Hardness: 61-62HRC
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - T10 - 170mm Santoku - Western Handle
Regular price
€154,95
Save €-154,95
Brand: Hitohira Line: T10 Profile: Gyuto Edge Length: 172mm Edge Steel: VG10 Steel Type: Stainless Cladding: Stainless Bevel: Double Bevel Bevel Symmetry: 50:50 Hand Orientation: Ambidextrous Handle: Western Total Length: 298mm Spine Length: 177mm Blade Height: 46mm Thickness at Spine: 1.5mm Thickness ½ way:1.5mm Thickness ~1cm from Tip: 0.8mm Handle Length: 120mm Weight: 149g Saya: N/A
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - T10 - 180mm Gyuto - Western Handle
Regular price
€154,95
Save €-154,95
Brand: Hitohira Line: T10 Profile: Gyuto Edge Length: 181mm Edge Steel: VG10 Steel Type: Stainless Cladding: Stainless Bevel: Double Bevel Bevel Symmetry: 50:50 Hand Orientation: Ambidextrous Handle: Pakka Western Total Length: 306mm Spine Length: 187mm Blade Height: 42mm Thickness at Spine: 1.7mm Thickness ½ way:1.6mm Thickness ~1cm from Tip:0.6 Handle Length: 120mm Weight: 134g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - T10 - 210mm Gyuto - Western Handle
Regular price
€164,95
Save €-164,95
Brand: Hitohira ひとひら (一片) Line: T10 Profile: Gyuto Edge Steel: VG-10 Steel Type: Stainless Cladding: Stainless Bevel: Double Bevel Hand Orientation: Ambidextrous Handle: Western Pakka Total Length: 337mm Edge Length: 212mm Spine Length: 217mm Blade Height: 45mm Thickness at Spine: 1.5mm Thickness ½ way: 1.5mm Thickness ~1cm from Tip: 0.9mm Handle Length: 117mm Weight: 159g
Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.
Hitohira - Tanaka x Mosuke - Blue #1 - 300mm Kiritsuke Yanagiba - Magnolia Handle - Saya
Regular price
€492,95
Save €-492,95
Brand: Hitohira ひとひら Made in: Sakai, Osaka - Japan Smith: Tanaka Uchihamono 田中打刃物 Sharpener: Mosuke モスケ Line: Tanaka x Mosuke Profile: Kiritsuke Yanagiba Edge Length: 291mm Blade Height: 36mm Edge Steel: Aogami #1/Blue #1 Steel Type: Carbon Construction: Awase, San-Mai Cladding: Soft Iron Finish: Migaki (standard) Bevel: Single Bevel Symmetry: 0/100 Hand Orientation: Right-Handed Handle Shape: Oval Octagonal Handle Material: Magnolia Wood Ferrule/Bolster Material: Buffalo Horn Total Length: 448mm Spine Length: 305mm Thickness of Spine at Handle: 4.0mm Thickness ½ way: 3.1mm Thickness ~1cm from Tip: 2.4mm Handle Length: 143mm Weight: 207g Saya/Guard: Saya
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - Tanaka x Mosuke - Blue #1 - 330mm Yanagiba - Magnolia Handle - Saya
Regular price
€445,95
Save €-445,95
Brand: Hitohira ひとひら Made in: Sakai, Osaka - Japan Smith: Tanaka Uchihamono 田中打刃物 Sharpener: Mosuke モスケ Line: Tanaka x Mosuke Profile: Yanagiba Edge Length: 319mm Blade Height: 36mm Edge Steel: Aogami #1/Blue #1 Steel Type: Carbon Construction: Awase, Ni-Mai Cladding: Soft Iron Finish: Migaki (standard) Bevel: Single Bevel Symmetry: 0/100 Hand Orientation: Right-Handed Handle Shape: Oval Octagonal Handle Material: Magnolia Wood Ferrule/Bolster Material: Buffalo Horn Total Length: 483mm Spine Length: 333mm Thickness of Spine at Handle: 4.0mm Thickness ½ way: 3.4mm Thickness ~1cm from Tip: 1.6mm Handle Length: 149mm Weight: 253g Saya/Guard: Saya
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Brand: Hitohira ひとひら Made in: Sakai, Osaka - Japan Smith: Togashi Blacksmith 富樫打刃物製作所 Sharpener: Kenya Togashi Profile: Gyuto Edge Length: 200mm Blade Height: 52.7mm Edge Steel: Aogami #1/Blue #1 Steel Type: Carbon Construction: Awase, San-Mai Cladding: Soft Stainless Clad Finish: Migaki Bevel: Double Bevel Symmetry: 50:50 Hand Orientation: Ambidextrous Handle Shape: Octagonal Handle Material: Ziricote Ferrule/Bolster Material: Buffalo Horn Total Length: 360mm Spine Length: 215mm Thickness of Spine at Handle: 2.2mm Thickness ½ way: 1.8mm Thickness ~1cm from Tip: 0.7mm Handle Length: 146mm Weight: 174g Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.