Culinary Knives

Brand: Hitohira ひとひら
Line: AH Carbon 一片 鋼
Made in: Sakai, Osaka - Japan
Profile: Gyuto
Edge Length: 275mm
Blade Height: 52mm
Edge Steel: Undisclosed Carbon
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Total Length: 399mm
Weight: 222g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan 
Profile: Gyuto/Chef
Edge Length: 207mm 
Blade Height: 45mm 
Edge Steel: VG10 
Steel Type: Stainless
HRC: 60±0.5HRC 
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed 
Handle Shape: Octagonal
Handle Material: Magnolia (Ho) Wood
Ferrule/Bolster Material: Buffalo Horn 
Spine Length: 222mm 
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 134mm 
Total Length: 357mm 
Weight:  123g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki-Gifu, Japan 
Profile: Santoku
Edge Length: 175mm 
Blade Height: 46mm 
Edge Steel: VG10 
Steel Type: Stainless
HRC:  60±0.5
Construction: Zenko (Mono-Steel)
Cladding: N/A 
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 177mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 0.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 122mm 
Total Length: 297mm 
Weight: 149g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made in:  Seki-Gifu/ Japan
Line: FJ VG10
Profile: Kiritsuke Petty
Edge Length: 146mm
Blade Height: 30mm
Edge Steel: VG10
Steel Type: Stainless
Construction: Convex
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Magnolia
Ferrule/Bolster Material: Black Buffalo Horn
Total Length: 275mm
Spine Length: 155mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 121mm
Weight: 55g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Gyuto
Edge Length: 208mm
Blade Height: 45mm
Edge Steel: Mono VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Monosteel (Sekiso)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 211mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 120mm
Total Length: 331mm
Weight: 159g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: N/A Mono-Steel
Bevel: Double
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal
Total Length: 386mm
Edge Length: 231mm
Spine Length: 246mm
Blade Height: 50mm
Thickness at Spine: 2.3mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 140mm
Weight: 156mm
Saya: Sold Separately

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Japan
Line: Futana
Profile: Gyuto
Edge Length: 244mm
Blade Height: 49mm
Edge Steel: Ginsan (Silver #3)
Steel Type: Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Soft Stainless
Finish: Nashiji
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Black Pakka
Ferrule/Bolster Material: Stainless
Total Length: 375mm
Spine Length: 245mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 124mm
Weight: 225g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら (一片)
Line: Nickel Damascus
Made In:  Tosa, Kochi - Japan 
Profile: Santoku
Edge Length: 170mm
Blade Height: 48mm
Edge Steel: AUS-10
Steel Type: Stainless
Cladding: Nickle Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Tagayasan Wa
Total Length: 315mm
Spine Length: 182mm
Thickness of Spine at Handle: 1.7mm 
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 135mm
Weight: 131g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら (一片)
Line: HG Damascus
Made in: Seki, Gifu - Japan 
Profile: Gyuto/Chef
Edge Length: 218mm 
Blade Height: 46mm 
Edge Steel: Unclassified
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 224mm 
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: .8mm
Handle Length: 146mm 
Total Length: 370mm
Weight: 128g 
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Undisclosed Stainless 
Cladding: Soft Stainless (Damascus) 
Bevel: Double Bevel 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Pakka (Western)
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.8mm 
Thickness of Spine Half Way: 1.6mm 
Thickness of Spine ~1cm from Tip: 0.7mm 
Weight: 156g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: HG
Profile: Gyuto/Chef
Edge Length: 246mm
Blade Height: 50mm
Edge Steel: Unclassified
Steel Type: Stainless Steel
Construction: Awase (Clad), San Mai
Cladding: Soft Stainless
Finish: Damascus (Sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal 
Handle Material: Walnut
Ferrule/Bolster Material: Pakka
Spine Length: 255mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 145mm
Total Length: 402mm
Weight: 139g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50/50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 335mm
Edge Length: 215mm
Spine Length: 127mm
Handle Length: 104mm
Blade Height: 46mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 184g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 112mm
Blade Height: 64mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 335mm
Spine Length: 210mm
Thickness of Spine at Handle: 4.3mm 
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 124mm
Weight: 358g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片) 
Line: Hiragana WS
Producing Area: Seki-Gifu/ Japan 
Profile: Santoku
Edge Length: 185mm
Edge Steel: AUS-8
Steel Type: Stainless 
Cladding: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal 
Total Length: 320mm
Spine Length: 294mm
Blade Height: 45mm
Thickness at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness at Tip: 0.6mm
Handle Length: 122mm 
Weight: 123g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: Hiragana WS
Profile: Gyuto
Edge Length: 216mm
Blade Height: 45.5mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (mono-steel)
Finish: Migaki (Standard)
Bevel: Double (asymmetrical)  
Bevel Symmetry: 10/90
Hand Orientation: Right-Handed
Handle: Octagonal Pakka
Total Length: 350mm
Spine Length: 225mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Weight: 125g
Saya/Guard: Purchased Separately 

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Gyuto
Edge Length: mm
Blade Height: mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 40/60
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Ebony
Ferrule/Bolster Material: N/A (Mono-Steel)
Spine Length: 216mm
Thickness of Spine at Handle: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 130mm
Total Length: 344mm
Weight: 140g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Seki, Gifu - Japan
Line: VG-1
Profile: Santoku
Edge Length: 166mm
Blade Height: 45mm
Edge Steel: VG-1
Steel Type: Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Migaki (Standard)
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Western
Handle Material: Pakka (Imitation Mahogany)
Ferrule/Bolster Material: Stainless Steel
Spine Length: 173mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 118mm
Total Length: 291mm
Weight: 145g
Saya/Guard: Sold Separately 

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care Advisement: Stainless

This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira  ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric 
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.