Culinary Knives

Brand: Hitohira ひとひら
Line: Hiragana 
Made in: Seki, Gifu - Japan
Profile: Deba 
Edge Length: 182mm 
Blade Height: 53mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single Bevel
Bevel Symmetry: 0/100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka 
Ferrule/Bolster Material: N/A
Spine Length: 188mm 
Thickness of Spine at Handle: 4.5mm
Thickness ½ way: 4.4mm
Thickness ~1cm from Tip: 2.6mm

Handle Length: 117mm  
Total Length: 306mm
Weight: 297g 
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 112mm
Blade Height: 64mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 335mm
Spine Length: 210mm
Thickness of Spine at Handle: 4.3mm 
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 124mm
Weight: 358g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Stainless Steel
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally betwxeen preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Hitohira ひとひら 
Made in: Seki-Gifu, Japan
Line: Hiragana
Profile: Yanagiba
Edge Length: 227mm
Blade Height: 35mm
Edge Steel: AUS-8
Steel Type: Stainless
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Migaki (Standard)
Bevel: Single
Bevel Symmetry: 0:100
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Spine Length: 236mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 115mm
Total Length: 354mm
Weight: 179g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.