Culinary Knives

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Stainless Clad
Profile: Gyuto
Edge Length: 205mm 
Blade Height: 54mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Stainless
Finish: Kurouchi, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Fumed-oak Handle
Ferrule/Bolster Material: Brass
Spine Length: 215mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 136mm
Total Length: 352mm
Weight: 192g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade has a carbon core and care must be taken to avoid rust along the edge steel. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Coutellerie Chambriard
Profile: Chef
Steel Type: Swedish 14C28N stainless
Hand Orientation: Ambidextrous
Handle: Western Juniper
Total Length: 333mm
Edge Length: 201mm
Spine Length: 205mm
Blade Height: 48mm
Thickness of Spine: 2.8mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 130mm
Weight: 228g
Saya/Guard: Brown Leather Sheath

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chef
Edge Length: 204mm
Blade Height: 57mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 214mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 116mm
Total Length: 333mm
Weight: 218g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Chef
Edge Length: 204mm
Blade Height: 57mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 214mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 116mm
Total Length: 333mm
Weight: 218g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Florentine
Made in: Barcelona - Spain
Profile: Utility/Chef
Edge Length: 201mm
Blade Height: 45mm
Edge Steel: 14C28N 
Steel Type: Stainless
HRC: 59-60HRC
Construction: Mono-Steel
Cladding: N/A
Finish: Satin/Brushed
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Hybrid
Handle Material: Composite and Leather
Ferrule/Bolster Material: Brass
Spine Length: 210mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 110mm
Total Length: 323mm
Weight: 143g
Saya/Guard: Sold separately, available here

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: Goyon Chazeau
Made In: Thiers - France
Line: Le Thiers
Profile: Bread
Edge Length: 187mm
Steel Type: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Buffalo Horn
Total Length: 305mm
Spine Length: 187mm
Blade Height: 22mm
Thickness: 1.8mm
Handle Length: 115mm
Weight: 123g

Includes a Wooden Box.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Profile: Chinese Cleaver
Edge Steel: SK-5
Steel Type: Stainless Clad Carbon
Cladding: Soft Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Beechwood OG
Total Length: 313mm
Edge Length: 202mm
Spine Length: 200mm
Blade Height: 79-84-79mm
Thickness: 2.2mm
Handle Length: 112mm
Weight: 329g

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Chef
Edge Length: 196mm
Blade Height: 39mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 319mm
Spine Length: 194mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 118mm
Weight: 194g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Chef
Edge Length: 198mm
Blade Height: 39mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 321mm
Spine Length: 195mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 118mm
Weight: 177g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Bread Knife
Edge Length: 205mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 329mm
Spine Length: 195mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 116mm
Weight: 179g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Chef
Edge Length: 213mm
Blade Height: 46mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 345mm
Spine Length: 210mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 129mm
Weight: 265g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Fillet
Edge Length: 203mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 325mm
Spine Length: 204mm
Thickness of Spine at Handle: 0.8mm
Thickness ½ way: 0.2mm
Thickness ~1cm from Tip: 0.1mm
Handle Length: 116mm
Weight: 134g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Auvergne
Profile: Slicer
Edge Length: 204mm
Blade Height: 30mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Corol Wood
Ferrule/Bolster Material: Stainless
Total Length: 328mm
Spine Length: 205mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 117mm
Weight: 165g
Saya/Guard: Sold Separately

About Auvergne Knives: The knives are forged in a single mass of stainless steel. The steel Z50C13, Rockwell 54-56 HRC, is tempered, ground and polished to produce a high-quality tool, great cutting power, cutting hardness and balance. Coral handles (Pressed Wood from Spain) are manually set and mounted on the tang using three rivets. 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Saigner Butcher
Profile: Butcher
Edge Length: 193mm
Blade Height: 39mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 323mm
Spine Length: 194mm
Thickness of Spine at Handle: 2.1mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 130mm
Weight: 130g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Old Butcher
Profile: Butcher
Edge Length: 199mm
Blade Height: 41mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western (Old Butcher)
Handle Material: Rosewood
Ferrule/Bolster Material: N/A
Total Length: 331mm
Spine Length: 192mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 138mm
Weight: 162g
Saya/Guard: Sold Separately

About these Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of Sabatier makers around 1950 to 1960. Grinding was done by hand in the traditional method. 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Line: Proxus 
Made in: Thiers - France
Profile: Bread
Edge Length: 205mm
Blade Height: 39mm
Edge Steel: Z50C13
Steel Type: Stainless
HRC: 54-56
Construction: Zenko (Mono-steel)
Cladding: N/A
Finish: Satin/Brushed
Bevel: Asymmetric 
Bevel Symmetry: N/A Serrated
Hand Orientation: Right-handed
Handle Shape: Western (Yo)
Handle Material: POM
Ferrule/Bolster Material: Stainless Steel
Spine Length: 195mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 11omm
Total Length: 329mm
Weight: 170g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: Stainless
This blade is stainless steel. While it is resistant to stains and corrosion, “stain-less” does not mean “stain-proof.” Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as softer woods and plastic.

Brand: K Sabatier
Made in: Thiers - France
Line: Proxus
Profile: Chef
Edge Length: 213mm
Blade Height: 47mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 345mm
Spine Length: 210mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 123mm
Weight: 260g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier 
Line: Vintage Nogent
Profile: Chef
Edge Length: 198mm
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Stabilized Wood
Total Length: 322mm
Spine Length: 195mm
Blade Height: 38mm
Thickness at Spine: 3.5mm
Thickness ½ way: 2.1mm
Thickness ~1 cm from Tip: 1.0mm
Handle Length: 105mm
Weight: 109g

About  NOGENT Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of French knife makers around 1950 to 1960. Grinding was done by hand in the traditional method.  Carbon Steel Old brand on the blade (Sabatier K Garanti - Acier Fondu)

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.