Culinary Knives

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 105mm
Blade Height: 30mm
Edge Steel:52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 220mm
Spine Length: 115mm
Thickness of Spine at Handle: 2.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Windmühlenmesser
Line: Buckel Fehrekampf 
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 48g
Saya/Guard: Comes with leather sheath and gift box

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Windmühlenmesser
Line: Buckel
Made In: Solingen - Germany
Profile: Buckel/Utility
Edge Length: 115mm
Blade Height: 20mm
Steel: Proprietary Stainless
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Fine Glazed
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle: Walnut
Total Length: 220mm
Spine Length: 115mm
Thickness at Spine: 1.3mm
Thickness ½ way: 1.3mm
Thickness ~1 cm from Tip: 1.3mm
Handle Length: 105mm
Weight: 38g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Yoshida Hamono 吉田刃物株式会社
Made in: Taku City, Saga - Japan
Line: ZDP189 Black(Kurouchi)
Profile: Petty
Edge Length: 145mm
Blade Height: 30mm
Edge Steel: ZDP189
Steel Type: Semi-Stainless
Construction: Awase (Clad)
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double Bevel 
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Total Length: 278mm
Spine Length: 155mm
Thickness at Spine: 1.9mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 120mm
Weight: 81g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care Advisement: Semi-Stainless

This blade is semi-stainless steel. It has better rust-resistance than standard carbon steel, but it is not completely stainless. Care must still be taken to keep the blade dry when not in use. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.