Japan

Hitohira - HG - Tsuchime Damascus - 160mm Nakiri - Western Handle

DAA-190-09-DA

€92,95

Brand: Hitohira ひとひら (一片)
Line: HG Tsuchime Damascus
Profile: Nakiri
Steel Type: Unclassified Stainless
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Imitation Mahogany, Western
Total Length: 288mm
Edge Length: 160mm
Spine Length: 170mm
Handle Length: 117mm
Blade Height: 45mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 187g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Tsuchime Damascus - 160mm Nakiri - Western Handle

Hitohira - HG - Tsuchime Damascus - 185mm Santoku - Western Handle

DAA-190-09-CA

€92,95

Brand: Hitohira ひとひら (一片)
Line: HG Tsuchime Damascus
Profile: Santoku
Steel Type: Unclassified Stainless
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Imitation Mahogany, Western
Total Length: 307mm
Edge Length: 185mm
Spine Length: 184mm
Handle Length: 128mm
Blade Height: 45mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 177g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - HG - Tsuchime Damascus - 185mm Santoku - Western Handle

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

AAA-279-01-NA120

€58,95

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 111mm
Blade Height: 43mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 225mm
Spine Length: 120mm
Thickness of Spine at Handle: 3.7mm
Thickness ½ way: 3.7mm
Thickness ~1cm from Tip: 3.1mm
Handle Length: 107mm
Weight: 169g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 120mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

AAA-279-01-NA150

€68,95

Brand: Hitohira ひとひら (一片)
Made In: Seki-Gifu, Japan
Line: Hiragana
Profile: Deba
Edge Length: 150mm
Blade Height: 55mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: N/A
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle: Western Pakka
Total Length: 276mm
Spine Length: 160mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4.0mm
Thickness ~1cm from Tip: 3.6mm
Handle Length: 116mm
Weight: 260g
Saya/Guard: Purchased Separately

Hitohira - Hiragana - 150mm Deba - Pakka Handle - No Bolster

Hitohira - Hiragana - 250mm - Bread Knife - Western Handle

AAA-275-01-QA250

€48,95

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 250mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 384mm
Spine Length: 250mm
Blade Height: 29mm
Thickness: 1.5mm
Handle Length: 133mm
Weight: 144g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 250mm - Bread Knife - Western Handle

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

AAA-275-01-QA-300

€58,95

Brand: Hitohira ひとひら (一片)
Line: Hiragana
Profile: Bread
Edge Length: 300mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Bevel: Serrated
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Black Plastic Western
Total Length: 435mm
Spine Length: 300mm
Blade Height: 28mm
Thickness: 1.5mm
Handle Length: 135mm
Weight: 166g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Hiragana - 300mm Bread Knife - Western Handle

Hitohira - Hiragana - WS - 210mm - Sujihiki - Octagonal Handle

daa-060-ga210

€92,95

Brand: Hitohira ひとひら (一片)
Line: Hiragana WS
Producing Area: Seki, Gifu - Japan
Profile: Sujihiki
Edge Length: 212mm
Edge Steel: AUS-8
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 347mm
Spine Length: 222mm
Blade Height: 32mm
Thickness at Handle: 1.9mm
Thickness ½ way: 1.6mm
Thickness at Tip: 0.5mm
Handle Length: 125mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Hiragana - WS - 210mm - Sujihiki - Octagonal Handle

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

AAA-268-09-CA165

€92,95

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Santoku
Edge Length: 165mm
Blade Height: 46mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 288mm
Spine Length: 170mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 116mm
Weight: 150g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya - MZ VG-1 - 165mm Santoku - Western Handle

Hitohira - Imojiya - TH - Stainless - Bunka - 180mm - Pakka Handle (Wa)

AAA-651-01-CB180

€92,95

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: TH
Profile: Bunka
Edge Length: 178mm
Blade Height: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 20/80
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Pakka
Ferrule/Bolster Material: Pakka
Spine Length: 185mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.3mm
Thickness ~1cm from Tip: .3mm
Handle Length: 140mm
Total Length: 325mm
Weight: 140g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya - TH - Stainless - Bunka - 180mm - Pakka Handle (Wa)

Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

daa-180-ba135

€92,95

Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Size: 135mm
Steel Type: Carbon
Steel: Aogami #2 (Blue #2), Soft Stainless Clad
Handle: Pakka Western
Total Length: 240mm
Edge Length: 132mm
Handle to Tip Length: 134mm
Blade Height: 25mm
Thickness: 1.6mm
Handle Length: 102mm
Weight: 77g
Hand Orientation: Ambidextrous

Saya/Guard: Sold Separately

Hitohira - Imojiya Kuma - Blue #2 - Nashiji/Tsuchime - 135mm Petty - Western Handle

Hitohira - Imojiya MZ - VG-1 - 145mm Santoku - Western Handle (2 Pin)

AAA-268-1-09-CA145

€72,95

Brand: Hitohira ひとひら (一片)
Made In: Seki, Gifu - Japan
Line: Imojiya MZ
Profile: Santoku
Edge Length:
Blade Height:
Edge Steel: VG1
Steel Type: Stainless
Cladding: Soft Stainless
Construction: Awase/Clad
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 250mm
Spine Length: 145mm
Thickness of Spine at Handle: 1.4mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 107mm
Weight: 86g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ - VG-1 - 145mm Santoku - Western Handle (2 Pin)

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

AAA-268-01-ZC135

€72,95

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Imojiya MZ VG1
Profile: Children's Santoku
Edge Length: 130mm
Blade Height: 40mm
Edge Steel: VG1
Steel Type: Stainless
Cladding: Stainless Cladding
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 250mm
Spine Length: 143mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 105mm
Weight: 105g
Saya/Guard: Purchase Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya MZ VG1 - 135mm Children's Knife - Pakka Handle

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - 75mm Paring - Wa Handle

DAA-181-AA

€77,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya - Tsuchime Damascus
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Paring
Edge Length: 75mm
Edge Steel: VG-10
Hardness: 60-61 HRC
Steel Type: Stainless
Cladding: Stainless Tsuchime Damscus
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Octagonal pakka, pakka ferrule
Total Length: 198mm
Spine Length: 94mm
Handle Length: 114mm
Blade Height: 21mm
Thickness: 1.9mm
Weight: 67g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - 75mm Paring - Wa Handle

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - Utility - 135mm - Pakka Handle

DAA-181-BB

€87,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Utility
Edge Length: 136mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka & Pakka Ferrule Octagonal
Total Length: 255mm
Spine Length: 140mm
Blade Height: 34mm
Thickness: 1.7mm
Handle Length: 114mm
Weight: 94g
Saya/Guard: Sold Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Hitohira - Imojiya ST - VG10 - Tsuchime Damascus - Utility - 135mm - Pakka Handle

Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle

AAA-265S-2-01-HA

€72,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric
Handle: Pakka Western
Total Length: 256mm
Edge Length: 137mm
Spine Length: 140mm
Handle Length: 113mm
Blade Height: 37mm
Thickness at Handle: 2.0mm
Thickness at Middle: 2.0mm
Thickness at Tip: 1.5mm
Weight: 143g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Kaku 135mm - Pakka Handle

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

AAA-265S-2-01-HB

€72,95

Brand: Hitohira ひとひら (一片)
Line: Imojiya TH
Producing Area: Seki-Gifu/ Japan
Profile: Honesuki Maru
Steel Type: Carbon
Bevel: Double
Bevel Symmetry: 90:10
Hand Orientation: Right-Handed, Asymmetric
Handle: Pakka Western
Total Length: 255mm
Edge Length: 148mm
Spine Length: 154mm
Handle Length: 103mm
Blade Height: 30mm
Thickness at Handle: 2.1mm
Thickness at Middle: 1.8mm
Thickness at Tip: 1.5mm
Weight: 157g
Saya/Guard: Purchased Separately

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Carbon - Honesuki Maru - Pakka Handle

Hitohira - Imojiya TH - Stainless - Migaki - Gyuto - 210mm - Western Handle

AAA-266Z4-01-FA210

€92,95

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Gyuto
Edge Length: 210mm
Blade Height: 45.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki
Bevel: Double Bevel (Asymmetrical)
Bevel Symmetry: 30/70
Hand Orientation: Right Handed
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 210mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .3mm
Handle Length: 120mm
Total Length: 335mm
Weight: 180g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Migaki - Gyuto - 210mm - Western Handle

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

AAA-266Z4-01-BA150

€72,95

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Petty
Edge Length: 148mm
Blade Height: 29.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A Mono-Steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetric)
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 148mm
Thickness of Spine at Handle: 1.3mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .2mm
Handle Length: 115mm
Total Length: 257mm
Weight: 88mm
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Migaki - Petty - 150mm - Western Handle

Hitohira - Imojiya TH - Stainless - Migaki - Santoku - 180mm - Western Handle

AAA-266Z4-01-CA

€87,95

Brand: Hitohira ひとひら
Made in: Seki, Gifu - Japan
Line: Imojiya TH
Profile: Santoku
Edge Length: 182mm
Blade Hight: 46.5mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Zenko (mono-steel)
Cladding: N/A mono-steel
Finish: Migaki (standard)
Bevel: Double Bevel (asymmetrical)
Bevel Symmetry: 30/70
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 182mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.1mm
Thickness ~1cm from Tip: .4mm
Handle Length: 117mm
Total Length: 300mm
Weight: 156g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Hitohira - Imojiya TH - Stainless - Migaki - Santoku - 180mm - Western Handle

Hitohira - Imojiya TH - Stainless - Paring Knife - Western Pakka Handle

AAA-266S2-01-AA

€63,95

Brand: Hitohira ひとひら (一片)
Line: TH Stainless
Profile: Paring
Edge Length: 77mm
Blade Height: 20mm
Edge Steel: DSR-1K6
Steel Type: Stainless
Construction: Mono
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Total Length: 190mm
Spine Length: 80mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 105mm
Weight: 58g
Saya/Guard: Purchased Sepatately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Hitohira - Imojiya TH - Stainless - Paring Knife - Western Pakka Handle

Hitohira - Tosa - White #2 Kurouchi - 80mm Japanese "Paring" Knife - Magnolia Handle

AAA-456-05-AA080

€92,95

Brand: Hitohira ひとひら (一片)
Made in: Tosa-Kochi/ Japan
Line: Kurouchi
Profile: Japanese Paring Knife
Edge Length: 85mm
Blade Height: 40mm
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Wa
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 195mm
Spine Length: 95mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 101mm
Weight: 67g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.