Japan

Brand: Sakai Kikumori 堺菊守
Line: Choyo  重陽 
Profile: Petty
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Wide Double Bevel
Hand Orientation: Ambidextrous 
Handle: Ho Wood Wa
Total Length: 278mm
Edge Length: 145mm
Spine Length: 156mm
Blade Height: 29mm
Thickness at Spine: 2.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 123mm
Weight: 71g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Choyo  重陽
Profile: Kiritsuke Gyuto
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Wide Double Bevel
Hand Orientation: Ambidextrous 
Handle: Ho Wood Wa
Total Length: 343mm
Edge Length: 196mm
Spine Length: 215mm
Blade Height: 41mm
Thickness at Spine: 2.4mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 128mm
Weight: 125g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Choyo 重陽
Profile: Gyuto
Edge Steel: White #2 (Shirogami)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Wide Double Bevel
Hand Orientation: Ambidextrous 
Handle: Ho Wood Wa
Total Length: 343mm
Edge Length: 196mm
Spine Length: 215mm
Blade Height: 46mm
Thickness at Spine: 2.8mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 128mm
Weight: 146g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Petty
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 278mm
Edge Length: 147mm
Spine Length: 155mm
Blade Height: 29mm
Thickness at Spine: 2.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 122mm
Weight: 71g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Santoku
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 314mm
Edge Length: 168mm
Spine Length: 186mm
Blade Height: 46mm
Thickness at Spine: 3.2mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.4mm
Handle Length: 128mm
Weight: 131g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Gyuto
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 382mm
Edge Length: 227mm
Spine Length: 243mm
Blade Height: 50mm
Thickness at Spine: 3mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 139mm
Weight: 174g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 378mm
Edge Length: 230mm
Spine Length: 243mm
Blade Height: 38mm
Thickness at Spine: 2.3mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1mm
Handle Length: 135mm
Weight: 131g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Gokujyo 極上
Profile: Sujihiki
Edge Steel: White #2
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Ho Wood Wa
Total Length: 415mm
Edge Length: 262mm
Spine Length: 275mm
Blade Height: 42mm
Thickness at Spine: 2.8mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 140mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Gokujyo
Profile: Chinese Cleaver
Edge Length: 223mm
Blade Height: 110.5mm
Edge Steel: Shirogami #2/White #2
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Migaki/Standard
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Ebony Western
Total Length: 338mm
Spine Length: 227mm
Thickness of Spine at Handle: 3mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 1.5mmm
Handle Length: 110mm
Weight: 528g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Uzu
Profile: Gyuto
Edge Length: 221mm
Blade Height: 51mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn Ferrule
Total Length: 377mm
Spine Length: 243mm
Thickness of Spine at Handle: 3.2mm
Thickness ½ way: 2.4mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 134mm
Weight: 192g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Petty
Edge Length: 127mm
Blade Height: 30mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 263mm
Spine Length: 140mm
Thickness of Spine at Handle: 2.5mm 
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 122mm
Weight: 71g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Kiritsuke Santoku
Edge Length: 164mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 314mm
Spine Length: 185mm
Thickness of Spine at Handle: 3.0mm 
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 128mm
Weight: 129g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守 
Smith: Tanaka Uchihamono 田中打刃物
Made In: Sakai - Japan
Line: KIKUZUKI Uzu
Profile: Santoku
Edge Length: 164mm
Blade Height: 46mm
Edge Steel: Blue #1 (Aogami)
Steel Type: Carbon
Cladding: Soft Iron Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Ho Wood
Total Length: 312mm
Spine Length: 185mm
Thickness of Spine at Handle: 2.6mm 
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 127mm
Weight: 124g
Saya/Guard: Sold Separately

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.