HITOHIRA ひとひら (一片)
We are proud to call Hitohira ひとひら (一片) our main Japanese supplier, and for good reason. Despite being a relatively new brand in the premium Japanese knife industry, Hitohira boasts one of the most diverse, unique, and robust product lineups in the entire market. Based in Tokyo, Hitohira brings a unique focus on building trust with the craftspeople they work with. By putting the artisan’s needs first, Hitohira has been able to gain favor with the best makers all over Japan and design some of the most beautiful and rare knives we have the pleasure of handling. We are excited and humbled for our relationship and product selection to grow with Hitohira over the years.
Hitohira - AH - Hagane - Gyuto - 270mm - Pakka Handle
AAA-165W-01-FA270
Brand: Hitohira ひとひら
Line: AH Carbon 一片 鋼
Made in: Sakai, Osaka - Japan
Profile: Gyuto
Edge Length: 275mm
Blade Height: 52mm
Edge Steel: Undisclosed Carbon
Steel Type: Carbon
Construction: Zenko (mono-steel)
Cladding: N/A
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 30/70
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 274mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.4mm
Handle Length: 125mm
Total Length: 399mm
Weight: 222g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.
Hitohira - AH - Hagane - Sujihiki - 270mm - Western Handle
AAA-165W-01-GA270
Brand: Hitohira ひとひら
Line: AH Carbon 一片 鋼
Made in: Sakai, Osaka - Japan
Profile: Sujihiki
Edge Length: 272mm
Blade Height: 39mm
Edge Steel: Undisclosed Carbon
Steel Type: Carbon
Construction: Zenko (Mono-Steel)
Cladding: N/A, Mono-Steel
Finish: Migaki (Standard)
Bevel: Double (Asymmetric)
Bevel Symmetry: 40/60
Hand Orientation: Ambidextrous
Handle Shape: Western (Yo) Handle
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Spine Length: 277mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 1.9mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 128mm
Total Length: 405mm
Weight: 188g
Saya/Guard: Sold Separately
Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.
Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.