Carbon

Brand: Ajikataya 味方屋
Smith: Hinoura Blacksmith 日野浦刃物
Made In: Sanjo-Niigata/ Japan
Edge Length: 214mm
Steel Type: Carbon
Steel: Yasuki White (Shirogami) #2, Soft Iron Clad
Handle: Oak
Hand Orientation: Ambidextrous
Total Length: 435mm
Handle to Tip Length: 230mm
Blade Height: 38mm
Thickness: 5.4mm
Handle Length: 213mm
Weight: 528g
Saya/Guard: Belt Sheath

Brand: Blenheim Forge
Made in: London, United Kingdom 
Line: Classic Range 
Profile: Gyuto
Edge Length: 222mm 
Blade Height: 55mm
Edge Steel: Super Blue
Steel Type: Carbon 
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi, Nashiji, Damascus, Forced Patina
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: English Walnut Handle
Ferrule/Bolster Material: Copper
Spine Length: 230mm
Thickness of Spine at Handle: 2.7mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Total Length: 367mm 
Weight: 187g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Kogetsu 光月
Smith: Goko Hamono 五香刃物製作所
Line: White #1 Mono
Profile: Gyuto
Edge Length: 207mm
Edge Steel: Shirogami (White #1)
Steel Type: Carbon
Cladding: None
Bevel: Double Bevel
Bevel Symmetry: 80/20
Hand Orientation: Right-handed
Handle: Wine Pakka Western 
Total Length: 329mm 
Spine Length: 211mm 
Blade Height: 48mm 
Thickness at Spine: 1.8mm 
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 118mm 
Weight: 181g
Saya/Guard: No

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: Echizen 
Profile: Yanagiba
Edge Length: 203mm
Blade Height: 31mm
Edge Steel: Blue #2
Steel Type: Carbon
Construction: Awase/Clad, Ni Mai
Cladding: Soft Iron
Finish: Damascus
Bevel: Single
Bevel Symmetry:  0/100 
Hand Orientation: Right Handed
Handle Shape: D-Shaped
Handle Material: Rosewood
Ferrule/Bolster Material: Pakka
Spine Length: 213mm
Thickness of Spine at Handle: 3.5mm
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 130mm
Total Length: 342mm
Weight: 120g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Japan
Line: Futana
Profile: Gyuto
Edge Length:
Blade Height:
Edge Steel: Super Aogami (Super Blue)
Steel Type: Carbon
Construction: Awase (clad), San Mai
Cladding: Soft Stainless
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal
Handle Material: Jindai Elm
Ferrule/Bolster Material: Ebony
Spine Length:
Thickness of Spine at Handle:
Thickness ½ way:
Thickness ~1cm from Tip:
Handle Length:
Total Length:
Weight:
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Futana - Super Blue
Profile: Gyuto
Edge Length: 217mm 
Edge Steel: Blue (Aogami) Super
Steel Type: Carbon
Cladding: Stainless Kurouchi Tsuchime
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 373mm
Spine Length:  230mm
Blade Height: 47mm
Thickness: 1.7mm
Handle Length: 142mm
Weight: 154g 
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made In: Japan
Line: Futana SB Migaki
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: Super Blue
Steel Type: Carbon
Cladding: Soft Stainless Clad
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 374mm
Spine Length: 228mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 144mm
Weight: 130g
Saya/Guard: N/A

Brand: Hitohira ひとひら (一片)
Line: White #2 Migaki Tsuchime
Profile: Gyuto
Edge Length: 216mm
Blade Height: 47mm
Edge Steel: White #2
Steel Type: Carbon
Grind: Convex
Construction: Awase/Clad
Cladding: Stainless
Finish: Migaki Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Cherry
Ferrule/Bolster Material: Ebony
Total Length: 376mm
Spine Length: 230mm
Thickness of Spine at Handle: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 145mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら 
Made in: Sakai-Osaka,Japan
Smith: Gorobei 五郎兵衛
Sharpener: Ren
Line: Gorobei x Ren
Profile: Gyuto/Chef
Edge Length: 199mm
Blade Height: 51mm
Edge Steel: Shirogami #2 (White #2)
Steel Type: Carbon
Construction: Awase (clad), San Mai
Cladding: Soft Iron
Finish: Damascus (sekiso)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal
Handle Material: Magnolia Wood
Ferrule/Bolster Material: Buffalo Horn
Spine Length: 214mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 3.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 143mm
Total Length: 357mm
Weight: 194g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片) 
Line: Nihonko
Profile: Chinese Cleaver
Edge Steel: SK Carbon
Steel Type: Carbon
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Western Wood
Total Length: 335mm
Edge Length: 222mm
Spine Length: 223mm
Blade Height: 90mm
Spine Thickness at Handle: 2.4mm
Spine Thickness 1cm from Tip: 1.7mm
Handle Length: 110mm
Weight: 392g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - Carbon
Profile: Chef
Edge Length: 228mm
Blade Height: 50mm
Edge Steel: XC75
Steel Type: Carbon Steel
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Carbon Steel
Total Length: 354mm
Spine Length: 225mm
Thickness of Spine at Handle: 2.5mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 0.3mm
Handle Length: 124mm
Weight: 251g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier 
Line: Vintage Nogent
Profile: Chef
Edge Length: 198mm
Steel Type: Carbon
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Stabilized Wood
Total Length: 322mm
Spine Length: 195mm
Blade Height: 38mm
Thickness at Spine: 3.5mm
Thickness ½ way: 2.1mm
Thickness ~1 cm from Tip: 1.0mm
Handle Length: 105mm
Weight: 109g

About  NOGENT Antique Knives: These knives were manufactured by the Fifth or the Sixth generation of French knife makers around 1950 to 1960. Grinding was done by hand in the traditional method.  Carbon Steel Old brand on the blade (Sabatier K Garanti - Acier Fondu)

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  Morihei 浅草橋 森平  
Made in: Tokyo / Japan
Line: Hisamoto Kurouchi
Profile: Gyuto
Edge Length:  214mm
Blade Height:  60mm
Edge Steel: White #2
Steel Type: Yasuki White (Shirogami) #2
Construction: Awase/Clad, San Mai
Cladding: Soft Iron
Finish: Kurouchi
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation:  Ambidextrous
Handle Shape: Octagonal 
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: Pakka
Total Length:  364mm
Spine Length:  229mm
Thickness of Spine at Handle:  4.6mm
Thickness ½ way:  2.9mm
Thickness ~1cm from Tip:  1.0mm
Handle Length:  136mm
Weight:  224g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Morihei

Line: Kisaku Koeda

Made In: Japan

Total Length: 210mm

Handle Length: 145mm

Blade Length: 45mm

Weight: 119g

Care Advisements: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Brand: Sakai Kikumori 堺菊守
Smith: Tanaka Uchihamono 田中打刃物
Made in: Sakai, Osaka - Japan
Line: Kikuzuki Kuro
Profile: Gyuto
Edge Length: 198mm
Blade Height: 46.5mm
Edge Steel: Shirogami #1/White #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Kurouchi (forge finish)
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal
Handle Material: Magnolia/Ho Wood
Ferrule/Bolster: Black Buffalo Horn
Total Length: 343mm 
Spine Length: 216mm
Thickness of Spine at Handle: 3mm 
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 0.8mm 
Handle Length: 127mm
Weight: 140g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Gyuto
Edge Length: 216mm
Blade Height: 58.3mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 363mm
Spine Length: 230mm
Thickness of Spine at Handle: 4.4mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 1.1mm
Handle Length: 134mm
Weight: 245g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Smith: Satoshi Nakagawa
Made in: Sakai, Osaka - Japan
Line: Blue #1 Damascus
Profile: Gyuto
Edge Length: 201mm
Blade Height: 46.6mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase/Clad
Cladding: Soft Iron
Finish: Damascus/Sekiso
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Oval Octagonal Wa
Handle Material: Magnolia/Ho Wood, Buffalo Horn Ferrule
Total Length: 341mm
Spine Length: 218mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 2.3mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 126mm
Weight: 151g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: N/A
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 333mm
Edge Length: 211mm
Spine Length: 212mm
Blade Height: 47mm
Thickness at Spine: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.5mm 
Handle Length: 120mm
Weight: 160g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.