in stock

Brand: Diawood 
Made In: Sanjo, Niigata - Japan
Style: Kitchen
Steel Type: Stainless
Finish: High Polish
Hand Orientation: Right-Handed
Total Length: 205mm
Blade Length: 70mm
Weight: 154g

Flattening Stones

Although all NSK stones are very wear resistant, these flattening/dressing stones are specifically formulated to counter the wear resistance and flatten at an impressive speed. They also work very well on natural stones as well, and the higher grit flattening plates will leave a scratch-free surface unlike many other diamond plates. The flattening stones are slotted to eliminate suction when rubbing against the sharpening stone.

If needed, coarser flattening grits can initially be used on higher grit sharpening stones to remove material quickly, as long as you condition the surface of the sharpening stone with a higher grit flattening plate before use in order to prevent overly-aggressive surface. Each grit of the flattening stones can be used on several different grits, so there is no need to get every single flattening grit for each corresponding grits of NSK sharpening stone you may have; see recommended grit ranges for each flattening stone below.

Flattening grits: 200, 400, 600, 1000, 3000, 6000

Recommended Use: Flattening grits from 200-1000 can be used on All NSK sharpening stones up to 1500 grit. All NSK sharpening stones with grits above 1000 should ideally be flattened with a grit as close to the stone's grit as possible. For example, a 3000 grit sharpening stone should be flattened with grits 3000 and above.

Brand: NSK
Length: 200mm
Width: 75mm
Height: 17mm
Weight: 468g
Grit Range: #3000

Flattening Stones

Although all NSK stones are very wear resistant, these flattening/dressing stones are specifically formulated to counter the wear resistance and flatten at an impressive speed. They also work very well on natural stones as well, and the higher grit flattening plates will leave a scratch-free surface unlike many other diamond plates. The flattening stones are slotted to eliminate suction when rubbing against the sharpening stone.

If needed, coarser flattening grits can initially be used on higher grit sharpening stones to remove material quickly, as long as you condition the surface of the sharpening stone with a higher grit flattening plate before use in order to prevent overly-aggressive surface. Each grit of the flattening stones can be used on several different grits, so there is no need to get every single flattening grit for each corresponding grits of NSK sharpening stone you may have; see recommended grit ranges for each flattening stone below.

Flattening grits: 200, 400, 600, 1000, 3000, 6000

Recommended Use: Flattening grits from 200-1000 can be used on All NSK sharpening stones up to 1500 grit. All NSK sharpening stones with grits above 1000 should ideally be flattened with a grit as close to the stone's grit as possible. For example, a 3000 grit sharpening stone should be flattened with grits 3000 and above.

Brand: NSK
Length: 200mm
Width: 75mm
Height: 17mm
Weight: 468g
Grit Range: #600

Oboro Knife

The newest NSK series, Oboro Knife was designed specifically for kitchen knives, and are very effective on a wide variety of steels for a wide variety of services. The abrasives in Oboro Knife tend to cut deeper and faster than other NSK lines, thus they are the most ideal series for full-blade servicing such as thinning, repairing, and reprofiling. Ideal for seasoned to advanced users.

Oboro Knife grits: 200, 400, 800, 2000, 4000, 6000

Brand: NSK Kogyo Ltd.
Thickness: 3.5mm
Length: 200mm
Width: 75mm
Height: 26.5mm
Weight: 740g
Grit Range: #6000

Oboro Knife

The newest NSK series, Oboro Knife was designed specifically for kitchen knives, and are very effective on a wide variety of steels for a wide variety of services. The abrasives in Oboro Knife tend to cut deeper and faster than other NSK lines, thus they are the most ideal series for full-blade servicing such as thinning, repairing, and reprofiling. Ideal for seasoned to advanced users.

Oboro Knife grits are: 200, 400, 800, 2000, 4000, 6000

Brand: NSK Kogyo Ltd.
Grit Range: #4000
Thickness: 3.5mm
Length: 200mm
Width: 75mm
Height: 26.5mm
Weight: 740g

Brand: Kanaya カナヤブラシ
Made In: Taito, Tokyo - Japan
Total Length: 215mm
Handle Length: 198mm
Bristle Length: 17mm
Width: 30mm
Weight: 10g

Brand: STEELPORT Knife Co.
Made In: Portland, Oregon - USA
Profile: Chef Knife
Edge Length: 170mm
Blade Height: 52mm
Edge Steel: 52100
HRC: 65
Steel Type: Carbon
Cladding: N/A 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Oregon Large Leaf Maple Burl w/ Integral Bolster
Total Length: 296mm
Spine Length: 175mm
Thickness of Spine at Handle: 3.3mm
Thickness ½ way: 2.8mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 122mm
Weight: 188g
Saya/Guard: Purchased Separately

Smithey's largest Dutch oven, the 7.25-quart, is a favorite for large families and famous chili recipes!

Designed with a wide base that provides extra surface area for searing and browning meats or vegetables, this Dutch oven is perfect for slow cooking, frying, roasting, braising, and baking. Featuring Smithey’s signature polished interior surface that is naturally non-stick and easy-to-clean, this Dutch oven is complete with a surface finish that will never crack or chip - in fact, the interior surface will only get better with use. Use it well!

Specs:

• Volume: 7.25 Qt
• Depth: 4.7"
• Handle to handle: 14.9"
• Total height: ~8.2"
• Weight (with lid): +/- 17.3 lbs
• Weight (pot only): +/- 11.5 lbs

A true stovetop stunner for family-style slow-cooking, baking, frying and more.

Honoring the best of vintage American Dutch oven design, the 5.5 QT Dutch Oven is a beautiful and functional kitchen work horse that is destined to be a modern heirloom. It’s the perfect Dutch oven for families of four or for those who love to slow cook and stew.

Featuring Smithey’s signature polished interior surface that is naturally non-stick and easy-to-clean, this Dutch oven combines the best of enameled cast iron heat performance with a surface finish that will never crack or chip—in fact, the interior surface will only get better with use and time. Crafted for versatility, Smithey designed the lid of this Dutch oven to work as a custom-fit lid for your No. 10 Traditional Cast Iron Skillet for extra convenience. Use it well.

• Volume: 5.5 Qt
• Depth: 4.6"
• Handle to handle: 13.3"
• Total height: ~8.2"
• Weight (with lid): +/- 14.5 lbs
• Weight (pot only): +/- 9.2 lbs

The Escali AHC4 Candy and Deep Fry Thermometer is the perfect tool to help you make great tasting candy, confections or deep-fried foods the whole family will enjoy. The classic time-tested paddle design features a hands-free vessel clip for safe measuring and temperature references for making different types of candy printed directly on the temperature scale.

Confectionary Temperature Zones
The paddle’s face includes temperature indications for cooking candy to the perfect consistency; including thread, soft ball, firm ball, hard ball, soft crack and hard crack markings.

Protective Probe Guard
The stainless steel metal paddle protects the temperature probe from false readings against the cooking container and accidental breaks.

Hands-free Vessel Clip
A stainless steel clip holds the thermometer in a pot for continuous hands free measurements.

Heat Resistant Handle
The heat resistant handle makes it easy to move the thermometer through the cooking process.

Easy to Read Measurements
The temperature column is easy to read and features both Fahrenheit and Celsius measurements.

Temperature Range: 60° to 400°F / 20° to 200°C

Dimensions: 12.75 x 2 x 0.75 in

Durable Stainless Steel

The Escali Oven Thermometer will help you verify oven temperatures and avoid overcooking your next meal. The clear dial display features baking and roasting temperature zone references as well as HACCP guidelines for hot foods holding and cooling. It has a durable stainless steel design which is NSF certified, oven safe and easy to clean.

Baking & Roasting Temperature Reference
Baking and roasting temperature zones are clearly indicated on the dial for quick reference.

NSF Certified
The manufacturing process of this product is regularly checked and certified by the National Sanitation Foundation and meets the highest standards for public health protection.

HACCP Guidelines
Hot foods holding temperature and hot foods cooling guidelines clearly indicated on the dial for food safety and quick reference.

Clear & Easy to Read Dial
The clear dial display is easy to read and features both fahrenheit and celsius measurements.

Stand or Hang from Oven Rack
Stand the thermometer on a rack or hang it from a rack oriented in either a parallel or perpendicular direction.

Oven Safe
The durable stainless steel construction allows the thermometer to be left in an oven or grill to measure internal air temperatures.

Temperature Range: 40° to 500°F / 10° to 260°C

Overall Dimensions: 2.375 x 1.5 x 2.875 in

Dial Diameter: 1.625 in

The Escali Pico High Precision Digital Scale is an ultra-sensitive, ultra-portable hand-held scale that measures with increments of 0.005 ounce or 0.1 gram. The Parts Counting function will allow you to count large quantities of small items, and the Display Hold feature will allow you to see measurements when a tray or plate is blocking the view of the display.

Compact Pocket-sized Design
The ultra compact design is easy to store away and very travel friendly.

Display Hold
Hold weight measurements on screen when weighing large items, even after they are removed from the scale.

Parts Counting
Count large quantities of small items with the accuracy and speed of a digital scale.

Tare Feature
Reset the scale to zero weight to measure multiple items or subtract the weight of container. (50 gram maximum tare.)

Automatic Shut-off
The scale will turn off after five minutes of inactivity to help conserve and extend battery life.

Capacity: 500 g

Increments: 0.005 oz (0.1 g)

Units: g, oz, lb, lb:oz

Battery: One 9-volt (included)

Dimensions: 4.5 x 3.75 x 1in

Brand: Sakai Kikumori 堺菊守 
Made in: Minamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Nakiri
Edge Length: 165mm
Blade Height: 58.8mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi, Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 316mm
Spine Length: 185mm
Thickness of Spine at Handle: 3.9mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 1.5mm
Handle Length: 134mm
Weight: 218g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Made in: Kumamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Bunka/Kiritsuke Santoku
Edge Length: 190mm
Blade Height: 53mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi, Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octagonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 337mm
Spine Length: 205mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 2.5mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 133mm
Weight: 216g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守 
Made in: Minamoto - Japan
Maker: Minomo Kajiya 蓑毛鍛冶屋
Line: MK
Profile: Santoku
Edge Length: 173mm
Blade Height: 53.5mm
Edge Steel: Aogami #2/Blue #2
Steel Type: Carbon
Grind: Flat
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Kurouchi (forge finish), Tsuchime (hammered)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Octogonal Wa
Handle Material: Oak
Ferrule/Bolster Material: N/A
Total Length: 320mm
Spine Length: 190mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.6mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 134mm
Weight: 196g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: lionSTEEL
Made In: Maniago - Italy
Line: T6
Style: Fixed Blade
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: CPM 3V
Steel Type: Carbon
Blade Length: 150mm
Blade Height: 44.6mm
Blade Thickness: 5.2mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Full Tang
Bolster/Guard: Canvas Micarta 
Pommel: Extended Tang
Handle Material: SOLID Canvas Micarta
Handle Color: Green
Blade Finish/Color: Black
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 140mm
Total Length: 295mm
Weight: 372g
Sheath/Clip: Kydex and Nylon Belt Sheath
Lanyard Hole: Yes

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.