in stock

Brand: Hitohira ひとひら (一片) 
Line: Nihonko
Profile: Chinese Cleaver
Edge Steel: SK Carbon
Steel Type: Carbon
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Western Wood
Total Length: 335mm
Edge Length: 222mm
Spine Length: 223mm
Blade Height: 90mm
Spine Thickness at Handle: 2.4mm
Spine Thickness 1cm from Tip: 1.7mm
Handle Length: 110mm
Weight: 392g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 430mm
Edge Length: 301mm
Spine Length: 305mm
Blade Height: 44mm
Thickness at Spine: 2.1mm
Thickness ~1cm from Tip: 1.9mm
Handle Length: 122mm
Weight: 217g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

This is the best cutting board in the world, seriously! Not harvested until a ripe 250-300 years old, Hiba trees grow in  the Aomori Prefecture in Northern Honshu and are a part of the cypress family. Aomori Hiba wood makes for and ideal cutting surface because it has the perfect firmness level, so it won't damage blade edges. Due to a compound called Hinokitiol, Aomori Hiba wood is also naturally full of antimicrobial and germicidal properties and is resistant to both rot and mold. Because of these resilient Aomori Hiba wood is often reserved for building shrines and temples in Japan. Plus it smells amazing!

380mm x 520mm x 30mm

 Disclaimer: These cutting boards are made out of single or 2-3 pieces of natural lumber  and could warp over time, it is a natural aspect of raw wood. We do not accept returns for warped boards.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Due to their unique dimensions, the shipping rate for cutting boards is $12/board.

Brand: Goyon Chazeau
Line: Thiers Olive 
Profile: Bread
Edge Length: 220mm
Steel Type: Stainless 
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western Olive Wood
Total Length: 360mm
Spine Length: 223mm
Blade Height: 27mm
Thickness: 2.5mm
Handle Length: 133mm
Weight: 186g
Saya/Guard: No

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Garasuki 
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 90/10
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 320mm
Edge Length: 190mm
Spine Length: 195mm
Blade Height: 53mm
Thickness at Spine: 3.8mm
Thickness ½ way: 3.6mm
Thickness ~1cm from Tip:  1.8mm
Handle Length: 125mm
Weight: 291g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Ryusen 株式会社 龍泉刃物
Profile: Bread
Edge Steel: VG10
Steel Type: Stainless 
Cladding: Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: 
Handle: 
Total Length: 
Edge Length: 
Spine Length:
Blade Height:
Thickness at Spine: 
Thickness ½ way: 
Thickness ~1cm from Tip: 
Handle Length:
Weight: 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Chef
Edge Length: 250mm
Blade Height: 49mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 377mm
Spine Length: 247mm
Thickness of Spine at Handle: 3.1mm
Thickness ½ way: 2.5mmn
Thickness ~1cm from Tip: 1.1mm
Handle Length: 124mmn
Weight: 255g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile: Slicer
Edge Length: 244mm
Blade Height: 31mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 364mm
Spine Length: 242mm
Thickness of Spine at Handle: 2.8mm
Thickness ½ way: 2.3mmn
Thickness ~1cm from Tip: 0.7mmn
Handle Length: 117mm
Weight: 170g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: K Sabatier
Made in: Thiers - France
Line: Authentique - 1834
Profile:  Slicer
Edge Length: 199mm
Blade Height: 26mm
Edge Steel: Z50C13
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: POM
Ferrule/Bolster Material: Stainless
Total Length: 312mm
Spine Length: 196mm
Thickness of Spine at Handle: 2.7mmn
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 107mm
Weight: 125g
Saya/Guard: Leather Sheath

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 392mm
Edge Length: 270mm
Spine Length: 275mm
Blade Height: 40mm
Thickness at Spine: 2mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 115mm
Weight: 182g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Sujihiki
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right Handed
Handle: Pakka Western
Total Length: 363mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 35mm
Thickness at Spine: 2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 1mm 
Handle Length: 115mm
Weight: 171g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Sakai Kikumori 堺菊守
Line: Nihonko 日本鋼
Profile: Gyuto
Edge Steel: SK Carbon
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrious
Handle: Pakka Western
Total Length: 370mm
Edge Length: 240mm
Spine Length: 245mm
Blade Height: 50mm
Thickness at Spine: 2.1mm
Thickness ½ way: 2mm
Thickness ~1cm from Tip: 0.9mm 
Handle Length: 120mm
Weight: 217g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Profile: Chinese Cleaver
Edge Steel: SK-5
Steel Type: Stainless Clad Carbon
Cladding: Soft Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Beechwood OG
Total Length: 313mm
Edge Length: 202mm
Spine Length: 200mm
Blade Height: 79-84-79mm
Thickness: 2.2mm
Handle Length: 112mm
Weight: 329g

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Simply the Best Kitchen Shears in the World!

Total Length: 195mm
Handle Length: 90mm
Blade Length: 50mm
Max Opening: 43mm
Weight: 224g
Steel Type: Stainless

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki/Gifu - Japan
Profile: Gyuto
Edge Length: 203mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 323mm
Spine Length: 207mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 121mm
Weight: 167g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand:  K Sabatier
Made in: Thiers - France
Line: G10 200
Profile: Fillet
Edge Length: 178mm
Blade Height: 26mm
Edge Steel: 14C28N
Steel Type: Stainless
Construction: Mono-Steel
Cladding: N/A
Finish: Matte
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: G10
Ferrule/Bolster Material: N/A
Total Length: 296mm
Spine Length: 192mm
Thickness of Spine at Handle: 2.4mm
Thickness ½ way: 0.8mm
Thickness ~1cm from Tip: 0.5mm
Handle Length: 109mm
Weight: 116g
Saya/Guard: Leather Sleeve

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen, Fukui - Japan 
Line: GR
Profile: Santoku
Edge Length: 165mm
Edge Steel: Aogami #2 (Blue #2)
Steel Type: Carbon
Cladding: Soft Iron
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Octagonal Rosewood Handle, Pakka Ferrule
Total Length: 304mm
Spine Length:178mm
Handle Length: 127mm
Blade Height: 45mm
Thickness of Spine at Handle: 2.6mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.5mm
Weight: 122g
Saya/Guard: Sold Separately 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Line: Futana
Profile: Gyuto
Edge Length: 216mm
Edge Steel: Ginsanko (S3)
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Cherry Wa
Total Length: 377mm 
Spine Length: 230mm 
Blade Height: 47mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 144mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: T10
Profile: Gyuto
Edge Steel: VG-10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 337mm
Edge Length: 212mm
Spine Length: 217mm
Blade Height: 45mm
Thickness at Spine: 1.5mm
Thickness ½ way: 1.5mm
Thickness ~1cm from Tip: 0.9mm
Handle Length: 117mm
Weight: 159g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.