$100-$199

Brand: Coutellerie Chambriard
Profile: Filet
Steel Type: 14C28N
Hand Orientation: Ambidextrous
Handle: Western Juniper
Total Length: 320mm
Edge Length: 201mm
Spine Length: 205mm
Blade Height: 27mm
Thickness at Spine: 2.8mm
Thickness ½ way: 1.0mm
Thickness ~1cm from Tip: 0.6mm
Handle Length: 118mm
Weight: 126g
Saya/Guard: Brown Leather Sheath

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Goyon-Chazeau
Made In: La Monnerie-le-Montel, Thiers - France
Line: Le Thiers Cuisine
Profile: Boning
Steel Type: Stainless
Bevel: Double Bevel 
Bevel Symmetry: 50:50
Handle: Olive Wood
Hand Orientation: Ambidextrous
Total Length: 265mm
Edge Length: 130mm
Spine Length: 130mm
Blade Height: 22mm
Handle Length: 135mm
Thickness of Spine at Handle: 2.6mm
Thickness of Spine Half Way: 2.1mm
Thickness of Spine ~1cm from Tip: 0.8mm
Weight: 161g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Line: FJ
Made in: Seki, Gifu - Japan
Profile: Honesuki Kaku
Edge Length: 146mm
Blade Height: 39.2mm
Edge Steel: Undisclosed Semi-Stainless
Steel Type: Semi-Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double Asymmetric (Right-Handed)
Bevel Symmetry: 10/90
Hand Orientation: Right Handed
Handle Shape: Western Handle
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 143.6mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 120mm
Total Length: 264mm
Weight: 142g
Saya/Guard: Sold Separately 

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら
Line: FJ VG-10
Made in: Seki, Gifu - Japan
Profile: Bunka
Edge Length: 172mm
Blade Height: 47mm
Edge Steel: VG-10
Steel Type: Stainless
HRC: 60±0.5
Construction: Zenko (Monosteel)
Cladding: N/A Monosteel
Finish: Migaki (Standard)
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Spine Length: 176mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Total Length: 296mm
Weight: 152g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 337mm 
Edge Length: 215mm 
Spine Length: 215mm 
Handle Length: 120mm 
Blade Height: 45mm 
Thickness of Spine at Handle: 1.4mm 
Thickness of Spine Half Way: 1.2mm 
Thickness of Spine ~1cm from Tip: 0.5mm 
Weight: 156g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Damascus
Profile: Santoku
Steel Type: Unclassified Stainless 
Cladding: Stainless Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Pakka Western
Total Length: 295mm
Edge Length: 171mm
Spine Length: 174mm
Handle Length: 118mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.5mm
Thickness of Spine ~1cm from Tip: 0.9mm
Weight: 157g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: HG Tsuchime Damascus
Profile: Gyuto
Steel Type: Unclassified Stainless 
Cladding: Stainless Tsuchime Damascus 
Bevel: Double Bevel 
Bevel Symmetry: 50:50 
Hand Orientation: Ambidextrous 
Handle: Imitation Mahogany, Western
Total Length: 335mm
Edge Length: 215mm
Spine Length: 127mm
Handle Length: 104mm
Blade Height: 46mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 184g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki, Gifu - Japan
Profile: Petty
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 257mm
Edge Length: 151mm
Spine Length: 155mm
Blade Height: 32mm
Thickness of Spine at Handle: 1.8mm
Thickness of Spine Half Way: 1.6mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 100mm
Weight: 96g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki-Gifu/ Japan
Profile: Paring
Steel Type: Stainless Steel
Hand Orientation: Ambidextrous
Steel: VG-10, Stainless Damascus Clad
Handle: Micarta Western
Total Length: 194mm
Edge Length: 88mm
Spine Lenght: 90mm
Blade Height: 21mm
Thickness of Spine at Handle: 1.7mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.8mm
Handle Length: 104mm
Weight: 72g
Saya/Guard: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

CARE ADVISEMENTS

This blade has a stainless cladding around most of the knife except for the edge, which is fully carbon. Care must still be used to avoid rust especially on the carbon portion of the blade. Wipe dry after each use, and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time on the carbon portion helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Seki/Gifu - Japan
Profile: Gyuto
Edge Length: 203mm
Edge Steel: Yasuki Blue (Aogami) #2
Steel Type: Stainless Clad Carbon Core
Cladding: Soft Stainless
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle: Western Pakka
Total Length: 323mm
Spine Length: 207mm
Blade Height: 47mm
Thickness at Spine: 1.7mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 121mm
Weight: 167g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made in: Seki-Gifu/ Japan
Line: MZ Chromax
Profile: Gyuto
Edge Length: 182mm
Blade Height: 43mm
Edge Steel: V-G1
Steel Type: Semi Stainless Steel 
Construction: Awase, San Mai
Cladding: Soft Stainless Clad
Finish: Migaki 
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless Steel
Spine Length: 187mm
Thickness of Spine at Handle: 2.3mm
Thickness ½ way: 2.0mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 118mm
Total Length: 304mm
Weight: 162g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements. 

Brand: Hitohira ひとひら (一片)
Line: Imojiya VG-10 
Smith: Seto 瀬戸
Producing Area: Seki-Gifu/ Japan
Profile: Gyuto
Edge Length: 240mm
Edge Steel: VG-10
Steel Type: Stainless
Hardness: 60-61HRC
Cladding: Stainless Tsuchime Damascus
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western
Total Length: 375mm
Spine Length: 245mm
Blade Height: 51mm
Thickness of Spine at Handle: 1.6mm
Thickness of Spine Half Way: 1.4mm
Thickness of Spine ~1cm from Tip: 0.9mm
Handle Length: 128mm
Weight: 232g
Saya/Guard: Purchased Separately.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Line: KH MV
Made in: Seki, Gifu - Japan
Profile: Deba
Edge Length: 183mm
Blade Height: 49mm
Edge Steel: Molybdenum Vanadium
Steel Type: Stainless
Construction: Zenko (Mono-Steel)
Cladding: N/A Mono-Steel
Finish: Migaki (Standard)
Bevel: Single
Hand Orientation: Right-Handed
Handle Shape: Western (Yo)
Handle Material: Pakka
Spine Length: 187mm
Thickness of Spine at Handle: 3.4mm
Thickness ½ way: 3.1mm
Thickness ~1cm from Tip: 2.5mm
Handle Length: 117mm
Total Length: 302mm
Weight: 222g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Line: Nihonko
Profile: Chinese Cleaver
Edge Steel: SK Carbon
Steel Type: Carbon
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Western Wood
Total Length: 335mm
Edge Length: 222mm
Spine Length: 223mm
Blade Height: 90mm
Spine Thickness at Handle: 2.4mm
Spine Thickness 1cm from Tip: 1.7mm
Handle Length: 110mm
Weight: 392g
Saya/Guard: N/A

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Made in: Echizen, Fukui - Japan
Line: NM 
Profile: Nakiri
Edge Length: 167mm
Blade Height: 45mm
Edge Steel: VG1
Steel Type: Stainless
Grind: Wide Double Bevel
Construction: Awase/San-Mai
Cladding: Soft Stainless 
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Stainless
Total Length: 292mm
Spine Length: 173mm
Thickness of Spine at Handle: 1.5mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 120mm
Weight: 148g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: V10 Special, Soft Stainless Clad
Handle: Pakka Western
Total Length: 245mm
Edge Length: 134mm
Handle to Tip Length: 136mm
Blade Height: 27mm
Thickness: 1.2mm
Handle Length: 110mm
Weight: 70g
Hand Orientation: Ambidextrous
Hardness: 61-62HRC

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira
Line: T10
Profile: Gyuto
Edge Length: 181mm
Edge Steel: VG10
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Pakka Western 
Total Length: 306mm 
Spine Length: 187mm 
Blade Height: 42mm 
Thickness at Spine: 1.7mm 
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 0.6
Handle Length: 120mm 
Weight: 134g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.