Culinary Knives

Brand: Hitohira ひとひら (一片) 
Line: Futana 
Profile: Sujihiki
Edge Steel: Ginsanko
Steel Type: Stainless
Cladding: Stainless 
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Wood & Ebony Ferrule Octagonal
Total Length: 432mm
Edge Length: 272mm
Spine Length: 288mm
Blade Height: 38mm
Thickness of Spine at Handle: 2.3mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 1.1mm
Handle Length: 145mm
Weight: 130g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片) 
Made In: Sakai, Osaka - Japan
Line: Futana 
Profile: Sujihiki
Edge Steel: S3
Steel Type: Stainless
Cladding: Stainless 
Bevel Type: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle: Cherry Octagonal 
Total Length: 403mm
Edge Length: 242mm
Spine Length: 258mm
Blade Height: 35mm
Thickness of Spine at Handle: 2.1mm
Thickness of Spine Half Way: 1.9mm
Thickness of Spine ~1cm from Tip: 1.0mm
Handle Length: 145mm
Weight: 127g
Saya: Purchased Separately

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)  
Made In: Seki-Gifu/ Japan  
Line: Imojiya TH
Profile: Bread Knife
Edge Length: 227mm
Blade Height: 37mm
Edge Steel: Mono DSR-1K6 
Steel Type:  Stainless Steel  
Bevel: Serrated 
Bevel Symmetry: Right Handed Serrations
Hand Orientation: Ambidextrous
Handle: Ho Wood & Buffalo Horn Ferrule Octagonal 
Total Length: 374mm
Spine Length: 246mm
Thickness of Spine at Handle: 1.9mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1mm
Handle Length: 127mm
Weight: 109g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. 

Brand:  Hitohira ひとひら
Made in: Seki-Gifu/ Japan
Line: KH
Profile: Petty
Edge Length: 120mm
Blade Height: 27mm
Edge Steel: Unclassified Stainless Steel  
Steel Type: Stainless Steel  
Construction: Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 30:70
Hand Orientation: Right-Handed
Handle Shape: Octagonal
Handle Material: Keyaki Zelkova
Ferrule/Bolster Material: N/A
Total Length: 245mm
Spine Length: 129mm
Thickness of Spine at Handle: 2.0mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 115mm
Weight: 46g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら (一片)
Smith: Kikuchiyo 菊千代
Sharpener: Rikichi 利吉
Made in: Sakai, Osaka, Japan
Line: Silver #3 
Profile: Yanagiba
Edge Length: 262mm
Blade Height: 36mm
Edge Steel: Silver #3 (Ginsanko)
Steel Type: Stainless
Grind: Single Bevel
Construction: Ni-Mai
Cladding: Stainless
Finish: Migaki
Bevel: Single
Bevel Symmetry: 100/0
Hand Orientation: Right Handed
Handle Shape: Octagonal 
Handle Material: Magnolia
Ferrule/Bolster Material: Buffalo Horn
Total Length: 415mm
Spine Length: 275mm
Thickness of Spine at Handle: 3.8mm 
Thickness ½ way: 2.9mm
Thickness ~1cm from Tip: 1.2mm
Handle Length: 137mm
Weight: 170g
Saya/Guard: Included

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: V10 Special, Soft Stainless Clad
Handle: Pakka Western
Total Length: 245mm
Edge Length: 134mm
Handle to Tip Length: 136mm
Blade Height: 27mm
Thickness: 1.2mm
Handle Length: 110mm
Weight: 70g
Hand Orientation: Ambidextrous
Hardness: 61-62HRC

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sakai, Osaka - Japan 
Smith: Togashi Blacksmith 富樫打刃物製作所 
Sharpener: Kenya Togashi
Profile: Gyuto
Edge Length: 200mm
Blade Height: 52.7mm
Edge Steel: Aogami #1/Blue #1
Steel Type: Carbon
Construction: Awase, San-Mai
Cladding: Soft Stainless Clad 
Finish: Migaki
Bevel: Double
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous 
Handle Shape: Octagonal 
Handle Material: Ziricote 
Ferrule/Bolster Material: Buffalo Horn
Total Length: 360mm
Spine Length: 215mm
Thickness of Spine at Handle: 2.2mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: 0.7mm
Handle Length: 146mm
Weight: 174g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade has a carbon edge and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Hitohira ひとひら (一片)
Producing Area: Echizen-Fukui/ Japan
Profile: Petty
Size: 130mm
Steel Type: Stainless Steel
Steel: SG2, Soft Stainless Clad
Handle: Wine Pakka Western
Total Length: 244mm
Edge Length: 131mm
Handle to Tip Length: 134mm
Blade Height: 29mm
Thickness: 1.3mm
Handle Length: 108mm
Weight: 71g
Hand Orientation: Ambidextrous
Hardness: 62-63HRC
Saya/Guard: No

 

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Morihei 森平 
Made in: Tokyo/ Japan 
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane 
Profile: Sujihiki
Edge Length:. 245 mm
Blade Height:  43 mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel 
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed 
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length:  366 mm
Spine Length:  245 mm
Thickness of Spine at Handle:  1.9 mm
Thickness ½ way:  2.0 mm
Thickness ~1cm from Tip:  1.3 mm
Handle Length:  119 mm
Weight:  163 g
Saya/Guard: Sold separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.


Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Morihei 森平
Made in: Tokyo - Japan
Line: Hisamoto Hagane
Sharpener: Morihei 森平
Profile: Sujihiki
Edge Length: 
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g

Brand: Morihei 森平
Made in: Tokyo - Japan
Smith: N/A
Sharpener: Morihei 森平
Line: Hisamoto Hagane
Profile: Sujihiki
Edge Length: 273mm
Blade Height: 40mm
Edge Steel: Mono SK High Carbon
Steel Type: Carbon Steel
Construction: Mono
Cladding: N/A
Finish: Migaki
Bevel: Double
Bevel Symmetry: 70/30
Hand Orientation: Right-Handed
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: Carbon Steel
Total Length: 405mm
Spine Length: 279mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.8mm
Thickness ~1cm from Tip: .8mm
Handle Length: 123mm
Weight: 197g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Tsubo Yoshikane 津保吉金
Made in: Seki, Gifu - Japan
Line: Bread
Profile: Bread
Edge Length: 205mm
Blade Height: 41mm
Edge Steel: Undisclosed Stainless
Steel Type: Stainless
Construction: Zenko/Mono-Steel
Cladding: N/A
Finish: Migaki
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed Asymmetric
Handle Shape: Western
Handle Material: Pakka
Ferrule/Bolster Material: N/A
Total Length: 325mm
Spine Length: 215mm
Thickness of Spine at Handle: 1.6mm
Thickness ½ way: 1.4mm
Thickness ~1cm from Tip: 0.8mm
Handle Length: 112.5mm
Weight: 138g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.