New!

Brand: Hitohira ひとひら (一片)
Made in: Sanjo-Niigata/ Japan
Line: TD SLD 
Profile: Santoku
Edge Length: 168mm
Blade Height: 49mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Grind: Wide Bevel
Construction: Awase/Clad
Cladding: Stainless
Finish: Tsuchime
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Total Length: 310mm
Spine Length: 180mm
Thickness of Spine at Handle: 4.7mm
Thickness ½ way: 1.6mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 130mm
Weight: 141g
Saya/Guard: Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Nakaya Heiji 中屋平次 
Made in: Mito City, Ibaraki - Japan
Smith: Nakaya Heiji 中屋平次
Sharpener: Nakaya Heiji 中屋平次
Line: Semi Stainless
Profile: Gyuto/Chef
Edge Length: 300mm
Blade Height: 34.7mm
Edge Steel: Semi Stainless
Steel Type: Carbon
Construction: Awase/Ni-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Single
Bevel Symmetry: 0/100
Hand Orientation: Right-Handed
Handle Shape: Oval Octagonal
Handle Material: Oak
Ferrule/Bolster Material: Buffalo Horn Ferrule
Total Length: 432mm
Spine Length: 287mm
Thickness of Spine at Handle: 4.3mm
Thickness ½ way: 4mm
Thickness ~1cm from Tip: 1.3mm
Handle Length: 144.5mm
Weight: 238g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Care advisement: This blade is fully carbon and care must be taken to avoid rust. Wipe dry after each use and ideally between preparing different products, especially when using acidic and salty products. A patina will form over time helping increase stain resistance slightly. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Brand: Nakaya Heiji 中屋平次
Made in: Mito City, Ibaraki - Japan
Smith: Nakaya Heiji 中屋平次
Sharpener: Nakaya Heiji 中屋平次
Line: Swedish Semi-Stainless
Profile: Gyuto
Edge Length: 246mm
Blade Height: 54mm
Edge Steel: Semi-Stainess
Steel Type: Semi-Stainless
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Oak
Ferrule/Bolster Material: Buffalo Horn Ferrule
Total Length: 398mm
Spine Length: 260mm
Thickness of Spine at Handle: 3.8mm
Thickness ½ way: 2.4mm 
Thickness ~1cm from Tip: 1.1mm
Handle Length: 142.5mm
Weight: 226g  
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Nakaya Heiji 中屋平次
Made in: Hito City, Ibaraki - Japan
Smith: Nakaya Heiji 中屋平次 
Sharpener: Nakaya Heiji 中屋平次
Line: Semi-Stainless 
Profile: Gyuto 
Edge Length: 204mm
Blade Height: 48.5mm
Edge Steel: Swedish Semi-Stainless
Steel Type: Carbon
Construction: Awase/San-Mai
Cladding: Soft Iron
Finish: Migaki (standard)
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Chestnut
Ferrule/Bolster Material: Buffalo Horn Ferrule
Total Length: 345mm
Spine Length: 219mm
Thickness of Spine at Handle: 3.7mm 
Thickness ½ way: 2.1mm
Thickness ~1cm from Tip: 1mm 
Handle Length: 127.5mm
Weight: 168g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Hitohira ひとひら
Made in: Sanjo, Niigata - Japan
Line: TD SLD
Profile: Gyuto/Chef
Edge Length: 242mm
Blade Height: 50mm
Edge Steel: SLD
Steel Type: Semi-Stainless
Construction: Awase, San-Mai
Cladding: Soft Stainless 
Finish: Nashiji
Bevel: Double  
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: Oval Octagonal
Handle Material: Walnut
Ferrule/Bolster Material: Bird's Eye Maple
Total Length: 398mm
Spine Length: 263mm
Thickness of Spine at Handle: 5.6mm
Thickness ½ way: 2.2mm
Thickness ~1cm from Tip: 1.0mm
Handle Length: 137mm
Weight: 201g
Saya/Guard: Sold Separately

Please note: These pictures and measurements are examples. Individual items may differ slightly in appearance and measurements.

Brand: Kanehide 兼秀
Line: Bessaku
Profile: Honesuki Kaku
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 90:10
Handle: Elastomer
Hand Orientation: Right Handed
Total Length: 263mm
Edge Length: 149mm
Spine Length: 149mm
Blade Height: 38mm
Handle Length: 117mm
Thickness of Spine at Handle: 2.0mm
Thickness of Spine Half Way: 2.0mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 109g
Saya: N/A

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Yoshida Hamono 吉田刃物株式会社
Made in: Taku City, Saga - Japan
Line: Damascus ZDP189
Profile: Gyuto
Edge Length: 216mm
Blade Height: 46mm
Edge Steel: ZDP-189
Steel Type: Semi-Stainless
Grind: Convex
Construction: Awase/Clad, San-Mai
Cladding: Stainless
Finish: Damascus
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Shape: No Handle
Tang Length: 95mm
Total Length: 327mm
Spine Length: 229mm
Thickness of Spine at Handle: 1.8mm
Thickness ½ way: 1.7mm
Thickness ~1cm from Tip: 1.2mm
Weight: 121g
Saya/Guard:  Purchased Separately

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Please note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: lionSTEEL
Line: T5
Made In: Maniago - Italy
Style: Fixed
Profile: Drop Point
Grind: Flat w/ Edge Bevel
Blade Steel: Niolox
Steel Type: Semi-Stainless
Blade Length: 120mm
Blade Height: 35.5mm
Blade Construction: Mono-Steel
Handle/Tang Construction: Full Tang
Bolster: N/A
Pommel: Extended Tang
Handle Material: Canvas Micarta
Handle Color: Green
Blade Finish/Color: Satin
Bevel: Double
Bevel Symmetry: 50/50
Hand Orientation: Ambidextrous
Handle Length: 122mm
Total Length: 255mm
Weight: 268g
Sheath/Clip: Leather Belt Sheath
Lanyard Hole: Yes

Brand: Kanehide 兼秀
Line: Bessaku
Profile: Honesuki Maru
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 10:90
Handle: Wood
Hand Orientation: Left Handed
Total Length: 257mm
Edge Length: 145mm
Spine Length: 147mm
Blade Height: 29mm
Handle Length: 111mm
Thickness of Spine at Handle: 2.2mm
Thickness of Spine Half Way: 2.1mm
Thickness of Spine ~1cm from Tip: 1.2mm
Weight: 115g
Saya: Purchase Separately.

Please Note: These pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements. The multicolor lacquer finish found on this knife is meant purely for the protection of the blade during shipping and handling, and will need to be removed before use.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.

Brand: Kanehide
Line: Bessaku
Profile: Honesuki Maru
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 90:10
Handle: Wood 
Hand Orientation: Right Handed
Total Length: 260mm
Edge Length: 150mm
Spine Length: 150mm
Blade Height: 29mm
Handle Length: 112mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 1.8mm
Thickness of Spine ~1cm from Tip: 0.6mm
Weight: 114g

Please Note: These pictures and measurements are examples. Your specific product may differ slightly in appearance and measurements.

Brand: Kanehide
Line: Bessaku
Profile: Kashiratori
Steel Type: Semi-Stainless
Bevel: Asymmetric Double Bevel 
Bevel Symmetry: 90:10
Handle: Elastomer
Hand Orientation: Right Handed
Total Length: 292mm
Edge Length: 170mm
Spine Length: 160mm
Blade Height: 28mm
Handle Length: 135mm
Thickness of Spine at Handle: 2mm
Thickness of Spine Half Way: 2mm
Thickness of Spine ~1cm from Tip: 1mm
Weight: 122g
Saya/Guard: N/A

Brand: Hitohira ひとひら (一片) 
Line: Imojiya - SG2
Smith: Seto 瀬戸
Producing Area: Seki, Gifu Prefecture
Profile: Gyuto
Edge Length: 210mm
Edge Steel: SG2
HRC: 62-64
Steel Type: Stainless
Cladding: Stainless
Bevel: Double Bevel
Bevel Symmetry: 50:50
Hand Orientation: Ambidextrous
Handle: Western pakka
Total Length: 230mm
Spine Length: 210mm
Handle Length: 115mm
Blade Height: 45mm
Thickness: 1.7mm
Weight: 170g
Saya/Guard: No

CARE ADVISEMENTS

This blade is fully stainless, but stainless does not mean stain proof. Do not leave in water, or acidic and salty products. Hand wash and dry only. Store away from liquids and open windows. Keep the blade covered when storing or traveling. Use only on appropriate cutting surfaces such as soft woods and plastics.

Please Note: The pictures and measurements are examples. Individual knives may differ slightly in appearance and measurements.